Jump to content
SAU Community

Recommended Posts

Selling pretty much a complete bolt on package for rb25 in a r33, these things are:

Garrett gt3082 with 0.82 rear

6 boost high mount,

44mm tial wastegate with 1 bar spring ( have 2 extra springs to change gate boost)

4 inch intake with large pod

3.5 inch full turbo back exhaust ( wastegate plumbed in) with a 5 inch venom cat and hks super dragger cat back

660cc top feed injectors and rail with dash 6 braided lines from fuel filter complete to sard fpr which includes speco fuel pressure gauge and reg.

wolf v500 already tuned to suit combo plug n play.

Made 330rwhp 13.5psi, 380rwhp 16.5psi, 430 19psi all on a safe tune and stock motor. Never really run 19psi due to stock motor.

All parts have only done under 5000km

$6000

Snow performance stage 2 WMi kit, only installed so just a bit dirty

$350

Turbosmart vee port bov $70

Rb25det engine with 150 - 155 psi compression. Will be a complete engine minus power steering pump, alternator, air con, rb26 cam covers and maybe the vct cam gear only, cam covers and cas.

$1500

All these parts won't be available until after December club cruise as I would like to attend it first. Except the WMi kit available now.

Link to comment
https://www.sau.com.au/forums/topic/434233-rb25-performance-parts/
Share on other sites

All parts available now, water meth kit $300,

rb25 engine $1300. Has 122000km, timing belt done at 115000 with water pump, gates timing belt, new tensioner and idler pulleys. Always serviced every 5000km or 6 months.

I might separate the complete package if enough interest in enough parts as I don't want to get stuck with left over parts.

I'd probably be interested in the exhaust side:

6 boost high mount,

44mm tial wastegate with 1 bar spring ( have 2 extra springs to change gate boost)

3.5 inch full turbo back exhaust ( wastegate plumbed in) with a 5 inch venom cat and hks super dragger cat back

and maybe the Garrett gt3082 with 0.82 rear too.

pending price/condition/willing to separate

Do you have a picture?

Will also have an exedy 3 puk ceramic clutch available to, feels good and doesn't slip at 400hp. I think it was rated at 450rwhp or a bit more, done about 20000km.

Also have a series 2 rb30 block with crank only and sump, with timing belt tensioner mod already done, and a rb25det head that has been ported and polished, comes with standard cams and that's all.

Perfect start to build a rb25/30. $400

  • 3 weeks later...


  • Similar Content

  • Latest Posts

    • Crazy how good the aero bar looks compared to the stock one
    • Yes, but you will need to rewire all the things that are different. CAS, coils, etc. Yes, but there is no IAT. What? You can use anything you like. It just has to be hooked up so that it will work.     Or are you wanting to just plug and play without having to do any thinking/work?
    • It's been a little over a decade since I bought the S15. As I did on my socials, I'll share some of my favorite pictures from over the years further below. If you haven't realised, pretty much all the pictures in my posts are ones I've taken.  In terms of updates, I don't have pictures, but I acquired a near-perfect pair of fog lights from a friend of mine, so those got swapped in for the pair I already had. As for the JZX110, I just got it back from being fixed. A few weeks back, I was on the highway when I suddenly drove over something with very little time to react. It was probably the size of a soccer ball, but it went under the car and banged into the underside pretty loudly. I pulled over and realized the fluid leaking was fuel, and of course, it was right near my exhaust. This required replacing the fuel tank. If you happen to be in the same predicament, thankfully this car shares a fuel tank with the JZS171, IS200, and IS300, so it wasn't too painful to replace. Enjoy some pictures as mentioned above, including the carnage from the fuel tank and a bonus picture I came across which shows how ridiculously shiny the Bugels are on the 110. So many more pictures I could share of the S15 but this will do for today, enjoy. 
    • Welcome.  Was the mistake the car, or joining us? 😏
    • Yeap, was me and the daughter getting coffee before heading to the new joint to measure up the fridge space and taking some pics that the solar installer wanted of the switch board
×
×
  • Create New...