Jump to content
SAU Community

R33, S13 And S15 Bits And Pieces

V8skylineMAN

By V8skylineMAN,
in Classifieds

 Share

Recommended Posts

V8skylineMAN Grand Master

V8skylineMAN

Posted
Posted

3x S14 manual gearbox Xmembers.$50 each

R33 rotors and calipers $400
s13 and r33 interior plastics, prices depending on what bit you're after.
R33 doors , L and R, $100 each including door cards and switches
S15 drivers guard $100
R33 front guards, Red ones $80, black ones $100
R34 rb25 block, under 80,000ks on it, rest of engine got parted out $200
R34 rb25 crank $100 no journal damage
New Rb25 sump, never been fitted, no scratches $100
2nd hand rb25 sump, $50
various radius rods(caster rods) let me know what measurement you want and ill see if i have some(i have a milk crate full of them for some reason) All appear to have good bushes in them $25 a pair
R33 caster rod brackets $50 the pair
r33 cross member, drops your rb lower than cefiro or r32 xmember does. $100
R33 lca's $150
S13 digital dash cluster $50
S15 JDM drivers side tail light $50
R33 tail lights $50 a side.
S13 bonnet (black) $80
R33 rear bumper $50
S13 rear bumper $50
S13 veilside rear bumper $50
S13 front bumper $50
S13 front reo, undamaged, uncut $150
will post up more as I remember what I've got...

come get it yourself, I'm not stuffing about posting things.

Located towards Ipswich. Pics available as reqiured

Link to comment
https://www.sau.com.au/forums/topic/434361-r33-s13-and-s15-bits-and-pieces/
Share on other sites
  • 1 month later...
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...