Jump to content
SAU Community

front r33 gtr b/bar f/s

wrxhoon
 Share

Recommended Posts

wrxhoon Grand Master

wrxhoon

Posted
Posted

i have a front bumper bar and lower lip to suit r33 gtr , just the bar no blinkers no grill , the b/bar is in very good nick mica red the lower lip has some minor scrapes under it and its black as it comes on the orginaly not painted , both are genuine i'm after $ 550 for the lot .

before you ask me if that will fit a gtst , i cant tell you yes or no make your own inquiries , im in sydney

Link to comment
https://www.sau.com.au/forums/topic/43464-front-r33-gtr-bbar-fs/
Share on other sites
wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted

no lip mate , they are very hard to find second hand ( they scrape and easy to damage )

no idea how much to send to bris . whats wrong with yours blitz ?

Blitz_R33 Mentor

Blitz_R33

Posted
Posted

The car came with a 400R front 2 piece bar. Originally the lower lip and side of the top bar was damaged, had to get it all fixed again. Now its all been fixed, i still has trouble with the lower lip because its to low to the ground..

I would much rather a gtr front bar as they are plastic (flexes instead of cracking) and itsnt as low to the ground as my 400R bar.

Yeah, gtr bars without the lower lips look a little silly. I did ask around on SAU for a lower gtr lip a while ago, but ppl wanted liek $400+ for the lip alone.

Good luck with you sale!

wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted

gor33, it is a STOCK gtr bar , its not aftermarket its stock plastic bar .i have a n1 b/bar in my gtr , again stock nissan plastic item so i don't need this one .

what car do you want to put on ?if its r33 gtst find out if it will fit first . why do you want a pic ? if you are interested in buying it and you want to see the condition of it then i will take some pics but if you are not i don't want to waist my time . let me know amd pm or post your email .

  • 5 weeks later...
myr332 Enthusiast

myr332

Posted
Posted
no lip mate , they are very hard to find second hand ( they scrape and easy to damage )

no idea how much to send to bris . whats wrong with yours blitz ?

i have a moroon R33 GTS-T - very interested in a GTR front bar. I do require to see some pictures though. Either upload or E-mail..

[email protected]

I'm based in Sydney..

Thanks

wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted

myr332 ,

why dont you come over and see it , u cant see much from a pic .

its just the bar though no lip of lights on it and i dont know if it will fit on a gtst , find out first .

  • 2 weeks later...
jamesh3 Contributor

jamesh3

Posted
Posted

I'm also im after a GTR front bar coz its plastic, i cracked my 400R coz its too low, using the stock-o bar now.. Im thinkin a GTR would be good. Do you know if they're any lower than a 400R *including the lip*. Could you give any pictures or measurements of the height. Also what series year model 33 was it taken from?

Cheers

now with lower lip as well $550 for the lot
wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted

jamesh3 do you have a gtr ?

this b/bar came off a s 1 gtr but s2 is the same not sure if they are higher than 400r but my car is standard hight and the lip is 175 mm of the ground at the lowest part ( in the middle )

keep in mind that it will hit sometimes when you go in a dished drive but it wont crack you just scrape it underneath .

i have someone thats interested in the b/bar but have not sold it yet

jamesh3 Contributor

jamesh3

Posted
Posted

That sounds alright, I like that fact that its plastic and will bend rather than crack first * i dont care about it scraping underneath. Ummm I'm going to go measure my car's ride hight right now *its been lowerd*... I have a r33 GTS-t 95 series 1.5. Series 1 body with the series 2 gear. I'm going to have to find out if it'll fit. Sounding alright so far. If it comes down to it, & i had to try and see if it fits on would that be ok, if it fits obviously i'd buy.

Cheers,

James

jamesh3  do you have a gtr ?

this b/bar came off a s 1 gtr but s2 is the same not sure if they are higher than 400r but my car is standard hight and the lip is 175 mm of the ground at the lowest part ( in the middle )

keep in mind that it will hit sometimes when you go in a dished drive but it wont crack you just scrape it underneath .

i have someone thats interested in the b/bar but have not sold it yet

wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted
That sounds alright, I like that fact that its plastic and will bend rather than crack first * i dont care about it scraping underneath. Ummm I'm going to go measure my car's ride hight right now *its been lowerd*...  I have a r33 GTS-t 95 series 1.5.  Series 1 body with the series 2 gear.  I'm going to have to find out if it'll fit.  Sounding alright so far.  If it comes down to it, & i had to try and see if it fits on would that be ok, if it fits obviously i'd buy.

Cheers,

James

you are welcome to come to my place and try it out , let me know when you want to do it .

as for the hight i think the gtr maybe lower than a standard hight gtst .

i'm not sure on that one though .

jamesh3 Contributor

jamesh3

Posted
Posted

Measured my car just then... dam its cold outside... :drooling:

The lowest part hanging off my car is an inch long metal plate off bottom of intercooler to warn me when dangerously low & scraping.. and that’s @ 140mm. The lowest part on my stock front bar is 160mm.

I'm thinking i may as well come and try it out.. just before i do, could i please get a photo or something, I want it to be in good condition, don’t care about scrapes under lip tho... and yeh. I'll PM you.

Cheers

you are welcome to come to my place and try it out , let me know when you want to do it .

as for the hight i think the gtr maybe lower than a standard hight gtst .

i'm not sure on that one though .

wrxhoon Grand Master

wrxhoon

Posted
  • Author
Posted

where abouts are you in sydney ? i dont have a pic i guess i could take one for you but you are not going to see much in a pic . is your car the same colour ?

the bar is in good nick no dints no cracks even the paint is good , the lip has the usual scrapres underneath but no cracks or dints .

anyhow let me know if you still want a pic and ill get a couple for you tomorrow .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...