Jump to content
SAU Community

Brembo Evo9 Calipers + Pmu Rotors + S/r Chassis Adaptors

d1a31
 Share

Recommended Posts

d1a31 Collaborator

d1a31

Posted
Posted

Im taking parts of my cefiro so this front brake kit is up for sale.

This is a straight bolt on for S13 S14 R32, the last photo shows the difference between a r32 4 pot front caliper

The calipers are off an evo9, the rotors are top of the line Project Mu SCR PRO 2 piece items with a RRP of $1355 !!

The adaptor plates are by Touge Factory in the USA

I don't have any verniers to accurately measure rotor thickness, these have seen 5 or 6 hard circuit days and the rest has been drift use.

The calipers need new pads otherwise ready to go, Im after $1400 for the lot in Adelaide Cheers Chris 0401 483 906

brembo1_zps65f21b1e.jpg

brembo2_zpsb520a8b8.jpg

brembo3_zps702a1564.jpg

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
simdog Collaborator

simdog

Posted
Posted

Would the adaptor plates fit a 33? If not could you PM me a price for just the calipers. Would need them posted to Brisbane 4073.

Cheers

«Cyph3r» Experienced

«Cyph3r»

Posted
Posted

Would the adaptor plates fit a 33? If not could you PM me a price for just the calipers. Would need them posted to Brisbane 4073.

Cheers

They'll bolt straight onto a 33 as well, s13/14/15 r32/33 are all the same spacing, offset etc so long as 5 stud model. Only different r chassis is 34 which uses slightly larger bolt holes with same centre to centre distance.

d1a31 Collaborator

d1a31

Posted
  • Author
Posted

The rotors are factory evo sizing so 320x32 Its a good adaptor kit really as factory evo rotors can be used or any of the many available aftermarket replacement rotors in factory evo size.

ROBAPHENT Contributor

ROBAPHENT

Posted
Posted

Yeah i use to have a EVO 6 the stopping power of a stock EVO system with a good set of pads was awesome. this could be next level and more then enough for most people (Cyber evo use to run this same setup on there evo)

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...