Jump to content
SAU Community

Recommended Posts

Hey Guys: 2005 350GT V35, although it is a manual has remote start ability if it is in neutral.There is only 1 remote come with it,which is quite old; once this one goes it is my understanding from Nissan here in Canberra, that there is no software here to replicate the codes for the vehicle that will allow for remote start again or even possibly cover general start replacement.

I was told there could possibly be an importer with this capability, has anyone heard of who or how to get round this problem?

Thanks. Adrian

Link to comment
https://www.sau.com.au/forums/topic/434885-new-full-feature-remote/
Share on other sites

There is a good chance the remote start could void your insurance, it is certainly non ADR compliant over here, it should have been disconnected as part of compliance. The car obviously doesn't have an ADR immobiliser fitted either.

Not sure how you could get a replacement unit but imo you are better off getting an aftermarket modern alarm, with autostart feature if you want it.

Yeah, I know the one. It's easy to use. My car has it functioning. I only use it on my private property, on which I can do whatever the fk I want to.

What Scotty says is technically correct.

Search and you'll find the instructions. It's a piece of piss to turn off too, as long as the hard wiring hasn't been ripped out it will work.

Hey Guys, pic of the remote, the car was imported in 2008, probably they had no clue then it has a remote start set up.

I haven't been able to locate another one for back up. Any clues on the shelf life of these things, must be close to 9yrs now.

Any recommendations of a decent alarm with remote start capability.

I don't understand why they would install this anyway, how does it work with the factory system, does it void it or just neutralise and sit beside it?

Nice car though, love it (although I flattened the battery the day after I bought it, still don't know how)

Adrian Zulu

Remote.docx

I have an idea on how I think it works although haven't tried it, after flattening the battery the other day I will just let it go for awhile, anyone else had the experience with remote start in a manual?

The other thing is I looked into changing over the 6 stacker to a single din with camera, everything but sat nav, because the kit from Japan is so expensive (to include all aircon and other features) that is 1500 on its own, by the time they fit the head unit it is going to cost 3k, a shit load of money has anyone done it cheaper? I have seen on here that the after market kit is heaps cheaper but looks cheap.

What would anyone else do? Blow the 3k?

Second hand dual din (base model) facia, buy modern local dual din stereo with whatever functions you want, profit?

There are a few alarms around with remote start capability, I could point you in the direction of a business to help out, but I have no idea if you are local.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...