Jump to content
SAU Community

Skyline Parts For Sale

nltd
 Share

Recommended Posts

nltd Enthusiast

nltd

Posted
Posted

LOCATED IN CANLEY HEIGHTS 2166, SYDNEY

PREFER NOT TO POST

PLEASE CONTACT VIA SMS ONLY - 0426876899

LOWBALLERS WILL BE IGNORED

PRICES NEGOTIABLE IF MULTIPLE ITEMS ARE PURCHASED

Parts i have for sale.

4 x standard turbos out of a BNR32 93' (needs rebuilts but all the parts are there. minot shaft play) - $60EA

2 x high flow turbos out of my old BNR32 (needs rebuilts but all the parts are there. minot shaft play) - $80EA

BRAND NEW aftermarket FMIC to suit gtr. 600x300x100 - $260

OEM injectors BNR32 93' - $220

OEM coilpacks BNR32 93' - $125

OEM FMIC + PIPING BNR32 - $200

OEM FRONT STRUT - $100

OEM intake piping - $230

EXEDY HD Clutch out of BNR32 - $350

still has plenty of meat, ive upgraded to a button and no longer need. rated to 400kw

APEXI air filter x 2 suite RB26 (larger sized) - $80ea or two for $150

BRAND NEW APEXI triple stand up guages - $190

RB26DETT LONG MOTOR - $1300

requires, turbos, sump. rest of the engine is there. ready for your RWD rb26DETT conversion.

engine has good compression and i would put it into my datsun. however i just blew all my money building the GTR.

DO NOT offer priced over the phone. come and have a look first. no one likes a first call haggler.

SIMMONS V4 17x8F/9R CHROME 3" LIP. mesh painted black. - $2100

Wheels in very good condition and will come with tyres with about 60% one tyre will need replacing. comes with SIMMONS centre caps.

ADVAN RG 17x8.5+35 all round - $1300

gold in colour with blue advan label round the wheel. wheels in great condition all round. period correct for R32 GTR's. Will come with 70% pirellis all round

AKEI RPF1 SILVER PAIR 18X9.5 +15 - $650

Wheels are in pretty much new condition. not a single scratch on the front face. brand new pairs are going for around $800.. and they look pretty much the same as mine..

BRIDE CUGA PAIR - $750

Great condition. has only ever been in my room. ive actually never fitted them on to the car since i bought it second hand so they are pretty schmick. no rails included

Link to comment
https://www.sau.com.au/forums/topic/434976-skyline-parts-for-sale/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • Kapr
      Freddy Plenum vs Genuine options RB25

      By Kapr · Posted

      @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Dose Pipe Sutututu
      Neil's R33 Gts-t Build

      By Dose Pipe Sutututu · Posted

      Holy shit... wow!!! I totally missed this
    • MBS206
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By MBS206 · Posted

      One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...