Jump to content
SAU Community

Recommended Posts

As you all/most of you would know Paul Walker Was killed Recently.,

Paul walker and the F+F movies were what led many people to have such a passion for cars. He wasn't just another actor, in real life he was a Genuine bloke who had a true passion for cars,as well as helping charities, and for many of people (including myself) was there idol and person who drove there love for cars and passion to learn about everything to do with our cars.

Now i know there would be many of people who really couldn't care that he died, and i respect that, just keep all your comments to yourself.

My plan is to organise a Sunday cruise along the coast, for all those who have a passion for cars, doesn't matter what you drive, drive for the love of it.

Looking for some response to this, around the 20th,21st, 22nd of December.

If i get a good response i will plan it formally using the guidelines with the help of some members who would be willing to help.

Look forward to hearing a response.

Bronson.

p.s Any ideas of good coastal roads i am more then open to suggestions as have never been on a cruise, am also from Rockingham so anywhere north or south i have very little knowledge of.

Link to comment
https://www.sau.com.au/forums/topic/435850-paul-walker-cruise/
Share on other sites

Just to inform everyone i found out there is already one planned for this friday.

Hope to see a few SAU members there to show there support.

the cruise is more of a charity run where all proceeds will go towards his charity.

Thanks for your time.

Bronson.

https://www.facebook.com/events/1438951212990892/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...