Jump to content
SAU Community

Wtb: R32 Gtr Brisbane And Surrounding Areas

joer32gtr

By joer32gtr,
in Classifieds

 Share

Recommended Posts

joer32gtr Rookie

joer32gtr

Posted
Posted

Looking to buy a R32 gtr Skyline prefer White car in the Brisbane and surrounding areas.

Must have working Air con and be willing to take to my mechanics to get it up on a hoist for a check over, you are welcome to be present and have a look yourself when being inspected.

Prefer VGC cars with no accident damage (or be honest about what repairs have been done)

Thanks

  • 2 weeks later...
brad_gtr Rising Star

brad_gtr

Posted
Posted

I have a 93 in Grey with 65k , just about immaculate , 34 GTR wheels, Ohlins, boost controller and cat back , but would be wanting mid 20's

post-5226-0-85476400-1388275531_thumb.jpg

brad_gtr Rising Star

brad_gtr

Posted
Posted

Had small damaged to front left when I bought in fro Japan and originally had 32k on it , eboost2 controller running 15lb. Shailer Park , have my own hoist as well.

041464575

Brad

joer32gtr Rookie

joer32gtr

Posted
  • Author
Posted

Thanks mate, away on a holiday atm will be in contact with you when i get back in th new year if we are going to come have a look at it. Probably not exactly what i'm looking for. Plan on driving the car a fair bit so would rack up the Km's,

 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...