Jump to content
SAU Community

Recommended Posts

This is my black four door. It started off life as a gun metal grey 20e auto. when I got a hold of it it was black, manual and 20de. I have since converted it to 20DET and I am in the process of getting it certified.

Mods:

20det

25det turbo

front facing plenum

alloy radiator

front mount intercooler

waste spark.

to do:

adjustibles

drive shaft hoops

5 stud and brakes

cert

boost controller

Only plans for it are to be a street car thats can be taken to the track and be raced, dragged, skidded or drifted.

DSC_0145.jpg

DSC_0146.jpg

DSC_0148.jpg

923103_530107027048239_191410499_n.jpg

600746_530107020381573_377088973_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/
Share on other sites

I need to fit a longer throttle cable for my plenum, cant find a longer one and no one has cable thick enough for me to make the stock one longer and they are not very helpful haha, they all think its too hard and send me on my way. Wouldnt be the first time making a throttle cable, ah well. just the way it goes.

So what is a good cable to use as an alternative or is there aftermarket ones to suit.

Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/#findComment-7156338
Share on other sites

Well took it out for its first drive in ages..... looks like I need a new clutch and it stalls sometimes when I pull up to a stop, a slight miss on decel and a miss just as boost comes on that goes away. Yet to look into it but I think either it has a air leak or the cheap fuel reg is shit house.

Other than that very happy with how it runs and how much more power it has, surprisingly torquey with my monster plenum :yes:

Here is my birthday skid for my 21st a few months back

and how the engine bay looked not so long ago :whistling:

003.JPG

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/#findComment-7157602
Share on other sites

Hey mate, nice ride. Just curious what power you're making with that set up?

Also regarding your car stalling, mine did the same. Had my ics (idle control sensor) pulled apart and cleaned, now she's sweet as :) carbon builds up in them and jams em up

Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/#findComment-7160442
Share on other sites

Thanks, I have no idea. It's yet to be dynod and tuned, but it goes like a cut cat. It was as fast as my mates 25DET but his wasn't Running right haha.

Thanks I Will try that, I recently cleaned the boost tee and now its stable as. Was full of black gunk and would hit 15 pound and creep back to 13psi etc. Good now though! Goes to show how much of an impact that black stuff makes.

Edited by Black4DR
Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/#findComment-7161271
Share on other sites

  • 7 months later...

Well I checked everything off on my list, making some decent power pre tune. Luched two gearboxes and a diff haha

Run a 14.2 @104mph. Would have done better but a lost 5th so had to pull the pin. New box and a tune will see me in the 13's :)

post-113937-14096475457334_thumb.jpg

post-113937-14096475758848_thumb.jpg

post-113937-14096476154663_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/436909-black4dr/#findComment-7380640
Share on other sites

  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Have you flushed the initial fluid yet? It should look like a rainbow unicorn shat glitter into it. 2nd or 3rd fluid change is when you party.
    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
×
×
  • Create New...