Jump to content
SAU Community

Recommended Posts

No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.
I can ship anything anywhere if you pay for it. Pickup is available no probs.
Location: Homebush/Sydney




===========================================


RB-Z gearbox

RB bellhousing with Z32 rear housing (RB and Z32 gearsets are the same)

- bolts onto an RB-series motor, RB20, RB25, RB26, RB30
- comes with Z32 shifter setup (not pictured)
- great for RB-motor conversions
- if you have an rb30/26 for sale then let me know I might buy it from you and use this gearbox behind it.

Price: $950


j8fg.jpg



===========================================


Blitz I-color Spec R twin solenoid sequential boost controller with 3/4 optional extras

*** all up it's a boost controller with gear or speed sensitive boost, boost gauge, water temp gauge, oil temp gauge, oil pressure gauge, multichannel logging system and performance meter ***

- best boost controller hands down
- twin solenoid for stable boost control
- all in one monitoring system so you don't need 6 gauges across your dash
- includes the optional Blitz oil temp sensor, plug and play
- includes the optional Blitz oil pressure sensor, plug and play
- includes the optional Blitz auxiliary-in wiring harness, plug and play
- I set it up to monitor water temperature as well
- can also monitor stuff like throttle position, AFM voltage, injector usage etc
- includes a set of s15 sun visors where I've mounted the display

Price = $750
Blitz triple sensor set sold.
Blitz I-color SPEC-R boost controller still available, price = $500
Price drop = $460

ut0c.jpg

zqed.jpg


===========================================



Auto Service MATSUFUJI s14 clutch pedal brace, may fit s15 and s13 but I don't know for sure.
This braces the clutch pedal bracket and stops it from flexing; is a good mod for those that run tuff clutches or likes to kick it once in a while. Stops the flex and stops the pedal bracket from breaking.

BRAND NEW
Price: $80
Price drop: $60
Price drop: $50
Price drop: $40



img6214custom.jpg




===========================================



Brand new genuine Turbosmart 4" straight silicon

Price: $20

img8465sb.jpg




===========================================


Custom s15/s14 catback exhaust with varex oval twin tip / stealth
---

Bee-R racing mid pipe with custom axle back and varex oval muff.
Hardwired the flap to a switch but I still have (I think) the wireless remote - you can have both. The flap gets stuck sometimes. Some scraps and bangs here and there. What you see is what you get.
Price: $380


vm2g.jpg
laff.jpg



===========================================


GTR32 front brakes
- includes pair of calipers. one caliper is missing a bleeder but Vsport gave me another one that seems to fit well - this is the big daddy 32mm thick version - thickest setup from Nissan, rarest of the alloy 4 pots. Was rebuilt and painted black before I installed it.
- includes pair of rotors - 296x32mm - freshly machined
- includes pair of pads - randoms
- includes hardlines
- inlcudes custom Goodridge ADR approved braided brake lines from my s15, probably suits s14 and s13 and 180sx, maybe R32 / R33 / R34 as well?

Price: $400


at1s.jpg
uac4.jpg
vhho.jpg






===========================================

Steering wheels
---
Works bell 350mm original, left in image, good condition, used = $100
Genuine VERTEX 325mm, brand new never used, DISCONTINUED model, rare --- right in image, BRAND NEW WHEEL used horn button = $450
Deep dish vertex not for sale.


61vv.jpg
l6ue.jpg
qt88.jpg
hy88.jpg


===========================================


s15 ignition key light
---
this is from the JDM s15 model, aussie delivered models don't have this light ring around the ignition barrel. includes a blue light.

Price: $50

6cg1.jpg

Here's an IDEA of what it looks like (it's a random google pic)
IMG_3644.jpg




===========================================

s15 tail light wiring looms.
---
i have two pairs of looms, from ADM s15s that I was going to rewire to JDM spec so the whole brake lights up.
both pairs = $50
one pair = $30


t4fm.jpg
w9ja.jpg

this is what it looks like to have the whole brake light lit:
post-6-0-41768200-1366703989_thumb.jpg


===========================================

Carbonetic / ATS ACROSS full 100% carbonfibre single clutch kit with flywheel and throw out bearing + carrier.
---
The only reason I'm selling this is because it started slipping over 320wkw, otherwise it's the best clutch hands down - i've used alot of different clutches before this including organic, single, twin, puck, sprung, unsprung etc.
I bought this single plate kit for $1800 and because it was soooooooooo good I'm now using a the same Carbonetic / ATS ACROSS carbon fibre clutch kit, but now I'm twinplate.

The carbon disc looks in good condition but since it slipped I would recommend you machine the flywheel and pressure plate.
The carbon disc brand new measures 4mm, it now measures 3.6mm which is 0.4mm of use - see below for pics.

Suits 5-speed gearbox SR20's, such as s14, s13, s15 5spd, r33 gearbox conversions, z32 gearbox conversions.


Price: $700


9p8t.jpg
tu5g.jpg
sdj6.jpg
1be0.jpg
6ujo.jpg
7cpe.jpg
http://imageshack.us/a/img844/5864/l27g.jpg

Here is the pic of the carbon disc when new - new is 4mm, this is currently at 3.6mm which is 0.4mm of usage:
http://img843.imageshack.us/img843/1387/ziay.jpg


===========================================

s15 center console / arm rest pocket
---
This little pocket has mounts specifically for s15 console/arm rest. there's 3 positions you can put it into. great for holding little things or coins instead of rummaging through your whole arm rest pocket.

Price: $40


http://imageshack.us/a/img834/5492/k5i6.jpg
http://imageshack.us/a/img842/4808/frg1.jpg
http://imageshack.us/a/img854/8415/u93n.jpg


===========================================



Other info:
No holds and no shotguns, nothing is sold till it's paid for or a deposit is put down.
I can ship anything anywhere if you pay for it. Pickup is available no probs.
Location: Homebush/Sydney

Cant get through via pm

Any chance of more pics of the works bell steering wheel?

adamadz2332@hotmail. Com

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...