Jump to content
SAU Community

Happy Laps - Queensland Raceway 22-03-14


Recommended Posts

Here's the photo's from Dan Swinbourne Photography. I arranged to have him come & shoot some pics for us. Please like his page while your there ;)

https://www.facebook.com/#!/media/set/?set=a.699000126808018.1073741862.570061356368563&type=1

I have a few forwards, not much else. I might try mounting it on the bonnet one day.

u should mount it on the roof too... view shd be nicer and not obstruct your view

tempted to get one too but seems a bit extravagant... it can be used for normal stuff too rite? like scenery etc... need more reasons to justify getting it :P

I have some from the roof as well, might try again next time. Yeah they can be used to take stills but a DSLR is better for that.

I used the Gopro on the last happy laps, I had it on the boot and on the side window. I have also seen on the front spoiler.

is that with the ultrawide views etc? cos some of the videos dont have that fish eye effect though

It's not a huge fish eye effect but it is noticeable. You can see it on my video.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...