Jump to content
SAU Community

Recommended Posts

Hi Guys,

I'm stripping out a MkIII Supra for the track, for sale are the 2x Bride Low-Max seats that came with it, and the Original Supra Recaros.

(We're putting in fixed-back race seats)

The Driver's Bride is almost as-new, and the passenger's only has marks from mounting, and sitting on the floor, you'd barely know it's been in a car.

$800 the pair ono, they're advertised elsewhere & on ebay.

post-16283-0-24540000-1391083630_thumb.jpgpost-16283-0-91830100-1391083757_thumb.jpgpost-16283-0-48573600-1391083780_thumb.jpgpost-16283-0-73309000-1391083809_thumb.jpg

The Recaros have height & angle headrest adjustment, thigh-support adjustment, driver's has seat-base height adjust too.

Passenger's is in good nick, driver's - well you can see in the pic, foam is all good - it's just the normal wear points on the bolster.

Not bad for 25yrs old I thought.

$550 the pair ono, they're advertised elsewhere & on ebay as well.

post-16283-0-78114900-1391084114_thumb.jpgpost-16283-0-03111300-1391084139_thumb.jpgpost-16283-0-01200700-1391084165_thumb.jpgpost-16283-0-00055700-1391084185_thumb.jpgpost-16283-0-33713500-1391084235_thumb.jpg

PM me or reply here, Seats are in Preston, Melbourne.

First preference given to local pick-up.

Shipping, if sold interstate to be organised by the buyer, at their expense.

And no, I don't want to sell them individually. (sorry)

  • 2 weeks later...

Heya folks, The Recaros have sold. Gone to a dude kitting-out a Gemini on his P's !

The Brides are still available, price re-considered to $750 :-)

  • 4 weeks later...

Are those Bride seats geniune? Willing to post to 4109 Brisbane?

Hi Al,

I'm not really sure if genuine - they came with a car I bought, which I'm stripping to make into a track car.

I think I saw somewhere that genuine Brides have an alloy frame, and these are Steel.

- Pretty good copy if they are fakes though, can't tell by looking at them.

I'm in Preston if anyone wants to have a look at them.

They were only in the car for 6 months, and most of that it sat in a warehouse. There's barely a mark on them.

Can freight to Brisvegas, but not included in that price - it'll be extra :-)

you do a magnet test to see if there fake on a part of the seat.. 90% sure if there steel there fake. and brand new on drift sales a guys selling 600 a pair. and thats brand new.

so 400 il pick up tonight. 0421882321

let me know

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
    • Thanks guys - I have been overseas for a hectic many weeks , so haven't had time to chase any of these up.  Some of the suggestions are for 4.1 ratio, which I already have, and a 3.5 at Lonsdale, which is also too tall.  Really looking for 3.9 or even a 3.7 LSD, either with M12 bolts. Will look some more.  
    • Yeah sounds like the swirl pot isn't being fed from the return line, would be made even worse by the high flow pump. 
    • This is the R32 one and the inside of the tank should look like this. which has an internal swirl pot, that the return line must empty into. (Interestingly, because the GTR tank is plastic it misses out on the swirl pot.) That is a potential cause for an aftermarket pump hanger to mess things up. Maybe the return is cut short and squirting over the side.
×
×
  • Create New...