Jump to content
SAU Community

Nissan Skyline R33 Sedan Rb25Det

Shakiel
 Share

Recommended Posts

Shakiel Rising Star

Shakiel

Posted
Posted
I've had this vehicle for a few of years but never got the chance to work on it and get it on the road.
It drives very well, the body has also been resprayed, comes with full bodykit (Final Conexxion Japan), front mount intercooler (Hybrid), Pod Filter (Brand unknown), aftermarket exhaust (brand unknown). Inside there is a Sony CD Player, aftermarket front & rear speakers and wiring provisions for an amplifier and subwoofer. .
Everything else is pretty standard. It will most likely suit someone with some vehicle repair knowledge as some work is required to get up to road standard. The body kit is currently off the vehicle and some minor but not serious work is required inside the car. I would also recommend a major service to get the engine freshened up. It starts up fine, no signs of knocking/misfire while on idle and being driven.
In terms of need 'Some work'. - Needs 4 roadworthy tyres - Front bar will require 2 indicator lenses with bulb wired in and mounted. Loom is sitting on left and right side ready to be wired (only 2 wires per side) - There is a clicking noise when turning steering wheel which sounds to be from airbag clock spring. A sport steering wheel was fitted in the past. - The right front mirror assembly was damaged, a second hand assembly will be provided. - Left rear tail lense has crack mark, so I am also providing a second hand lense that will pass. - Battery is pretty much on the way out, can crank over off a jump start. - Windscreen washer jets and hose need to be fitted - Bodykit requires fitment - Rear windscreen needs new surround mould, old mould was cracked and peeling. These things plus a good service basically will have the car running good enough for a roadworthy inspection.
I will be happy to let it go for $2,500.
Prefer pick up unless buyer can organise shipping

PM or contact on 0403 596 801. Located south east suburbs, Melbourne, Victoria.

Pictures available on this link -

https://imageshack.com/a/Rhzb/1

Link to comment
https://www.sau.com.au/forums/topic/438666-nissan-skyline-r33-sedan-rb25det/
Share on other sites
Shakiel Rising Star

Shakiel

Posted
  • Author
Posted

I've put in another battery with proper charge and it starts up fine with no jump start now.

I Need to get rid of this.

Dropping price down to $2000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...