Jump to content
SAU Community

Recommended Posts

I've got one Magnaflow Race Series 14151 3.5" straight through oval muffler for sale.

Had a new custom exhaust made to re-route the piping on my R34 GTR and went 3" instead of 3.5" as I didn't need 3.5" for my power goal.

These are INCREDIBLY quiet for 3.5" straight through mufflers, if you could have heard the car with these mufflers fitted you wouldn't have believed they are straight through - truly amazing mufflers offering great flow and sound. In fact I have the exact same muffler but the 3" version installed on my car right now.

Was used for 3-4 months total and didn't do very many km's, maybe 1k at the most.

The muffler has rear hangers welded on to suit the rear rubber mounts of an R34 GTR, you can cut these off if you wish.

Condition of the muffler is excellent, it was protected quite well above the rear diffuser :) Made from 304 stainless steel.

Asking for $200, postage can be organised also.

6rrlo.JPG

6rrwe.JPG

Prefer cash payment on pickup but bank transfer is available and delivery can be organised at the buyers cost.

Location: Noble park VIC 3174

Phone: 0427 214 192 (Andrew)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...