Jump to content
SAU Community

32 Gtr Not Starting After A Boot Full

limitlessperformance

By limitlessperformance,
in General Maintenance

 Share

Recommended Posts

limitlessperformance Rookie

limitlessperformance

Posted
Posted

Car started to hiss on boost from somewhere around the brake master to intake area was quite loud in car. Also had a 4wd and hicass light on that I've been working out over last few weeks.

Was also due for a service so did oil filter , oil , plugs and got given a set of second hand good nick super spark plugs and a igniter , also moved a few earths around as voltage had been low later since a sparky worked on it .

Car started great volts were over 12 my guess 13-14 everything on including lights no probs, 4wd still not working and hicass lift on ,

Took it for drive steering the best it's been very light everything going well take of in first and then rolling give it a steady boot full - pulls hard then once off it develops a miss ? Like it's dropped a cylinder limp home and it's idle almost normal till I give it some revs and the miss is very loud

Turn of and it doesn't want to start again

limitlessperformance Rookie

limitlessperformance

Posted
  • Author
Posted

Clutch pedal was making weird noises and felt crap so pulled that off today and found a few things fixed it up and sealed it up put it back together also found pipe between intake and brake master thing in the corner was a weak seal .. Clutch is now feeling good but it won't start still - the starter is cranking hard volts are over 12

89CAL Grand Master

89CAL

Posted
Posted

I don't want to be negative. But it sounds like you are having a problem, then you immediatly jump on here asking questions, then you go look at stuff and find problems.

Please go and have a proper look over everything and test things out properly first

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...