Jump to content
SAU Community

32 Gtr Not Starting After A Boot Full

limitlessperformance

By limitlessperformance,
in General Maintenance

 Share

Recommended Posts

limitlessperformance Rookie

limitlessperformance

Posted
Posted

Car started to hiss on boost from somewhere around the brake master to intake area was quite loud in car. Also had a 4wd and hicass light on that I've been working out over last few weeks.

Was also due for a service so did oil filter , oil , plugs and got given a set of second hand good nick super spark plugs and a igniter , also moved a few earths around as voltage had been low later since a sparky worked on it .

Car started great volts were over 12 my guess 13-14 everything on including lights no probs, 4wd still not working and hicass lift on ,

Took it for drive steering the best it's been very light everything going well take of in first and then rolling give it a steady boot full - pulls hard then once off it develops a miss ? Like it's dropped a cylinder limp home and it's idle almost normal till I give it some revs and the miss is very loud

Turn of and it doesn't want to start again

limitlessperformance Rookie

limitlessperformance

Posted
  • Author
Posted

Clutch pedal was making weird noises and felt crap so pulled that off today and found a few things fixed it up and sealed it up put it back together also found pipe between intake and brake master thing in the corner was a weak seal .. Clutch is now feeling good but it won't start still - the starter is cranking hard volts are over 12

89CAL Grand Master

89CAL

Posted
Posted

I don't want to be negative. But it sounds like you are having a problem, then you immediatly jump on here asking questions, then you go look at stuff and find problems.

Please go and have a proper look over everything and test things out properly first

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • MBS206
      R33 GTR running -9 with no tune

      By MBS206 · Posted

      You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • MBS206
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By MBS206 · Posted

      Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • 677_GTR
      R33 GTR running -9 with no tune

      By 677_GTR · Posted

      I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...