Jump to content
SAU Community

Currently Wrecking R32, R33 And 180Sx In Brisbane


Recommended Posts

Wts

Bulk parts for r33/r32/180sx

Good rb25det gearbox - $950

Full r33 manual conversion - $1300

Full s13 manual conversion - $1000 brand new clutch

sr20det engine good runner no hotside or injectors - $1000

rb25det s1 engine good runner no turbo - $1000

rb25det suit rebuild - $350

Rear reo bars - $30 each

Rb25 s1 and s2 super spark coilpacks - $270 per set

Walbro fuel pump in s13/r32 cradle - $80

Garrett 3071r turbo setup - $1300

R32 front strut brace - $70

S13 rear strut brace - $70

R33 front strut brace - $70

R33 headlights - $170

R32 headlights no pairs - $80 each

180sx rear seats - $20

R32 passengers seat - $20

R32/r33 heater and ac boxes - $30 each

Misc speakers - $20 per pair

Ignitors/afms/cas - $60-$80

R32 sedan genuine skirts and pods - $500

R32 sedan vertex skirts - $150

R33 front bar - $100

R32 coupe full kit veilside style - $250

R32/r33 5 bolt shafts - $100

S13 3x2 bolt shafts - $50

S13 catback exhaust - $150

R32 coupe boot lid - $60

R32 coupe rear bar - $60

R33 coupe rear bar - $50

R33 steering rack - $70

R32/r33/s13/s14 stock suspension arms - $20 each

Lots of gauges from $30 each

Turbo timers from $20 each

Gfb boost tee - $40

Npc rb25 lightened flywheel - $150

Stock rb25det flywheel - $70

Momo course steering wheel - $100

R33/r32 front guards - $50 each

R32/r33 parcel trays - $50 each

Rb20/rb25 engine parts heaps of bits – from $20 each

Rb20/25 top mount manifold with external gate - $200

Rb26 injectors - $170

180sx hatch mint - $150

180sx doors - $30 each

S13/r32 window motors - $70 each

R33 rear windscreen - $60

Pod filters – from $20

180sx tail lights - $70

R33 tail lights - $70

Lots of interior bits from $20

R33 front seats - $70

S13 front seats - $50

R33 radiator - $70

R33 catback exhaust x3 - $150 each

Rb25det s1 engine looms - $130

X2 rb20det gearboxes one with broken 2nd one with broken 5th - $100

R33 tail shaft - $100

R33 door shells - $30 each

door cards - $20

lock and ignition sets - $150 each

boot linings - $60 each

Rb starter motors - $50 each

please contact 0420 767 957 or pm me (mobile preferred)

this is only a small portion of whats available if you need something just ask

springwood 4127
but can post

Edited by Sifty33

no speaker covers if thats what your meaning? they all have holes for speakers... the r33 ones I have come with covers but not r32

  • 2 weeks later...

triptych I dont have them sorry... slickyr33 are you after a front mount kit with piping?

contact me on 0420 767 957 for a faster response :)

  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...