Jump to content
SAU Community

Recommended Posts

Hi,

Clearing out the garage...

I have a complete set of 'used' Advan A050. Originally purchased new from Gordon Levin for around $500ea. These would be ideal for someone with an EVO or some sort of AWD setup. Cheap tyres which are a definite step up from using regular street tyres. Fantastic for someone wanting to get into circuit as well.

Product Description:

In good condition. No flat spots, and have been stored properly in the garage.

There is approx 2-3mm of tread left which would easily see 2-3 trackdays depending on how you drive.

Medium Compound

04/11 Build date

Price:

$675 Negotiable

Location:

South West Sydney

Shipping info:

Local pick up OR happy to ship at buyers expense. East coast metro should be approx $75

Contact:

0403337740 or PM

photo114_zps38175e1f.jpg

photo315_zps5ff054f4.jpg

photo48_zps0aa447b9.jpg

photo214_zpsf4f8277e.jpg

photo215_zps1d7fa9e4.jpg

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...