Jump to content
SAU Community

Recommended Posts

Hey guys, recently and finally departed with my beloved 33 after 7 years and had to strip it back before sale...

everything perfect working order and all bits included to bolt to stock manifolds or top mount and guarenteed to put a smile on face :D

Kando tdo6sl2 turbo and Tial MVR 44mm Wastegate

Comes with modified or standard rear housing..with modified housing the wastegate sits on top and will bolt to your stock manifold, looks real neat too...or if you are planning to top mount I can provide a stock turbine housing instead...less than 5000kms on it..made 265kw @ 1 bar on fuel capable of more, But I tuned for E85 where it made 303kws @ 17.5.. I think we hit a restriction after that, I didn't bother try find it as it was plenty fast enough for me....very quick, responsive and powerful setup

Comes with dump that bolts directly to 33 front pipe, spacer plates gaskets and all the oil, water lines, and fittings needed...

WP_000341_zps66bb8bf0.jpg

1900152_10152280105571499_1745701579_n_z

Adaptronic Select plug in

dont waste your time with silly afms or boost controllers , This ECu does the lot...boost control, onboard MAP, launch control, flex fuel, etc etc

Just plug in and play...comes with lines and even a few tunes to get you running if you buy the turbo injectors package deal..

1957985_10152280130731499_717331614_n_zp

750cc Xspurt Injectors rail and SX reg

Custom made to fit under a standard rb25 intake plenum,,these injectors work great with good economy and effiency..

pics here

http://www.skylinesaustralia.com/forums/topic/403711-top-feed-rail-in-r33-with-stock-plenumyes-it-can-be-done/?hl=%2Btop+%2Bfeed+%2Brb25

So there it is, take it all, bolt it on and you're ready to rumble.. Asking $2800 for the lot..prefer to sell as package, but willing seperate if it doesn't.

PM or 0415 121 985

Cheers..

David

  • 2 weeks later...
  • 3 weeks later...

Ok Ecu is gone...taking offers on Turbo and gate...

Also have set of 6 Splitfire coilpacks I forgot to advertise...work perfect...gotta be worth, I dunno 350$

Turbo with stock rear housing 600$

or

With modified rear housing and gate 1000$

either way it will come with dump pipes, oil and water lines, fittings for block and spacer for manifold..so is ready to bolt up to any rb20/25...

splitfire Coilpacks 350$

Injectors I'm probably keeping them now for my JZ..but for $800 will sell the lot cause the rail is useless to me now...

Cheers.. :)

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...