Jump to content
SAU Community

GTR Boost Experiences

JayDee

By JayDee,
in Engines & Forced Induction

 Share

Recommended Posts

JayDee Contributor

JayDee

Posted
Posted

I am not wanting to go wild with my R32 GTR but do want to increase boost to a safe level. It has the standard ceramic wheeled turbos. I am hearing many varying opinions on safe boost level with some people saying up to 18psi.

I am wanting to know at what boost any people have experienced failures. For example, if nobody has had a failure at 14psi then I am happy to boost to that level but if ANYONE has had a failure at that boost then I won't go there (just to be safe).

Hopefully we can come up with a level that will allow me to sleep at night.

Link to comment
https://www.sau.com.au/forums/topic/44036-gtr-boost-experiences/
Share on other sites
meshmesh Mentor

meshmesh

Posted
Posted

This argument is always debated, however as far as I know.. the limit of the stock ceramic turbos is around 14-15psi... you can safely achieve this by removing the restrictor. Other have run much more, but the argument is not IF but when will your ceramic turbos give in, and risk further damage to the motor by debrit.

ferni Grand Master

ferni

Posted
Posted

my turbos have been running ~1bar (14-15psi) for over 20,000kms, no problems...

Best to get a tuner to do it, make sure the A/F ratios are safe etc...

i think jezzr (he posted about running an 11 on stock turbos) is running 18psi

Also depends how your driving, I don't think 1bar on stock turbos would last long on the track (correct me if i'm wrong?)

Daily driving 1bar should be fine

JayDee Contributor

JayDee

Posted
  • Author
Posted

Bad news Ken! This was on your R32 I assume and only at 1bar. I vaguely remember you telling me at your shop only a couple of days ago how there is definitely no problems at 1 bar, just kidding!

Incidently, you know how you had my GTR on the Dyno and it ran up to 8200(rev limit???) and slight boost increase to 10psi which lead you to believe it had computer work done. Well it would seem that you were right. I pulled the computer side kick panel off and it has a Mines tuned computer with their serial numbered gold guarantee sticker on it with tamper seals that haven't been broken. It would be very interesting to see exactly what has been done to the car. I would have thought it a bit strange to have it Mines programmed when as far as I know there is only a 3inch exhaust on it and only producing 263rwhp.

By the way if any of you guys are in Perth, Ken did a pre-purchase inspection on my GTR and he is a great bloke to deal with and the inspection was very well priced too. He really knows his GTR stuff (except the safe boost level on std turbos )

Rowdyr32 Mentor

Rowdyr32

Posted
Posted

I've got a 32gtr engine in my gtst and I was wondering if its worth buying a factory boost controller and hooking it up. How well do they hold boost, do they spike? I know an aftermarket one would probably be better but are they worth the extra money on a stock motor? I am a tight ass!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...