Jump to content
SAU Community

Recommended Posts

I am not wanting to go wild with my R32 GTR but do want to increase boost to a safe level. It has the standard ceramic wheeled turbos. I am hearing many varying opinions on safe boost level with some people saying up to 18psi.

I am wanting to know at what boost any people have experienced failures. For example, if nobody has had a failure at 14psi then I am happy to boost to that level but if ANYONE has had a failure at that boost then I won't go there (just to be safe).

Hopefully we can come up with a level that will allow me to sleep at night.

Link to comment
https://www.sau.com.au/forums/topic/44036-gtr-boost-experiences/
Share on other sites

This argument is always debated, however as far as I know.. the limit of the stock ceramic turbos is around 14-15psi... you can safely achieve this by removing the restrictor. Other have run much more, but the argument is not IF but when will your ceramic turbos give in, and risk further damage to the motor by debrit.

my turbos have been running ~1bar (14-15psi) for over 20,000kms, no problems...

Best to get a tuner to do it, make sure the A/F ratios are safe etc...

i think jezzr (he posted about running an 11 on stock turbos) is running 18psi

Also depends how your driving, I don't think 1bar on stock turbos would last long on the track (correct me if i'm wrong?)

Daily driving 1bar should be fine

Bad news Ken! This was on your R32 I assume and only at 1bar. I vaguely remember you telling me at your shop only a couple of days ago how there is definitely no problems at 1 bar, just kidding!

Incidently, you know how you had my GTR on the Dyno and it ran up to 8200(rev limit???) and slight boost increase to 10psi which lead you to believe it had computer work done. Well it would seem that you were right. I pulled the computer side kick panel off and it has a Mines tuned computer with their serial numbered gold guarantee sticker on it with tamper seals that haven't been broken. It would be very interesting to see exactly what has been done to the car. I would have thought it a bit strange to have it Mines programmed when as far as I know there is only a 3inch exhaust on it and only producing 263rwhp.

By the way if any of you guys are in Perth, Ken did a pre-purchase inspection on my GTR and he is a great bloke to deal with and the inspection was very well priced too. He really knows his GTR stuff (except the safe boost level on std turbos )

I've got a 32gtr engine in my gtst and I was wondering if its worth buying a factory boost controller and hooking it up. How well do they hold boost, do they spike? I know an aftermarket one would probably be better but are they worth the extra money on a stock motor? I am a tight ass!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...