Jump to content
SAU Community

Opinions please - Time for a turbo for my GTSt

SouthernR33
 Share

Recommended Posts

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Sydneykid Grand Master

Sydneykid

Posted
Posted
Dyno run was probably done in 3rd gear, so the gear ratio actually multiplies the torque...another reason why 4th gear is good for dyno runs

Next car I have on the dyno (doesn't matter how much power) I am going to do a power run in 3rd and then one in 4th and post it. There is not much difference. :)

Roy Grand Master

Roy

Posted
Posted
Next car I have on the dyno (doesn't matter how much power) I am going to do a power run in 3rd and then one in 4th and post it.  There is not much difference. :)

In power maybe not, but surely there would be a difference in the torque reading, or is there some internal calibration base don final drive ratio used?

infected flow Rising Star

infected flow

Posted
Posted

Dear sydney kid ,

about the tomei poncams 256 @ 9.2mm lift thats actually a bit weird on a r34 why did u choose these ? ......

since the duration is smaller youll be pushing alot more boost to get the power since it is restricting the flow .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...