Jump to content
SAU Community

Recommended Posts

A family with a disabled son was looking for a van converted for a wheelchair.


They paid the dealer $1000 to source a Nissan Elgrand in Japan. The dealer not only happily takes the 1k 'sourcing fee', but he later presents them with a vehicle that was already landed/in stock ...with wound back kms!


Luckily the family did contact us and ordered a JOC check. The car was advertised with 38'127kms on the odometer, but the registration documents provided by us proved that it had already done over 120'000kms last year before it was exported. (see pics)


This is what the family wrote to us:


'Dear JOC


We checked the odometer reading you sent against the advertised odometer. XXXX says the odometer reading is 38,000 – whereas the results you sent us say 121,200 (about 3 x more than what they told us). We approached the dealer (XXXXX) and were told that ‘it’s those people in Japan who are winding back the clocks’. We had paid $1,000 for this company to find us a wheel chair converted vehicle in Japan so we can transport our young son with cerebral palsy. The only thing they did was to try to sell us this vehicle they already in Sydney.


Families like us struggle to find vehicles and are at risk of exploitation. We’re glad we did our research and found you but some other desperate family will get caught. Meanwhile – XXXXX promised we would get our $1,000 back but this has not happened.


Hope you can do something proactive to ensure this vehicle is advertised at its correct odometer (not only is this fraud – but people may have a false sense of security about the safety and reliability of their vehicle.


Regards

X'


Here is the link to the FB page: https://www.facebook.com/Japanese.Odometercheck


SHARE IF YOU CARE


Thanks,

JOC

post-134502-0-23585900-1402461317_thumb.jpg

post-134502-0-30719100-1402461325_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/444294-unscrupulous-dealer/
Share on other sites

SHARE IF YOU CARE
Thanks,
JOC

Hi JOC,

Let me know if the dealer does not honour his promise by the end of this month please?

I pray that his conscience will override his greed.

If he doesn't come good, let me know (with the family's permission) who & where I send a $100 cheque to, and it'll be done.

That's just a small contribution I know.

Terry

  • Like 1

Hi JOC,

Let me know if the dealer does not honour his promise by the end of this month please?

I pray that his conscience will override his greed.

If he doesn't come good, let me know (with the family's permission) who & where I send a $100 cheque to, and it'll be done.

That's just a small contribution I know.

Terry

Thanks mate.

I have passed their story to a contact from the Daily Telegraph. He will put in a good word/some pressure on as well. It might not be his conscience that will be the decisive factor...

I'll keep you posted..

Cheers,

JOC

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...