Jump to content
SAU Community

Recommended Posts

Hi all,

Finally organised my garage over the weekend and pulled out everything worth selling. Parts have been taken off a 1995 R33 GTR V-Spec with 80,000km at the time.

Location: All items are in Sydney, NSW. I am willing to ship at buyer's expense.

Contact: Liam 0437991794 or PM

PICTURES BELOW

2 x Nissan Skyline R33 GTR wheels (pair)
Wheels are in reasonable condition with a few small scratches and paint chips.

Size: 17x9" +30 offset

PCD: 5x114.3mm

Tyres: Yes, Yoko A050 semi slicks with 20% life in them

Price $550

2 x Stock R33 GTR turbos

Never used with more than stock boost and were running fine when taken off the car.

Price: $200

Spal 16" Curved Vane Thermo Fan (Pull)

Fan has only been used for approximately 5000kms. Includes rubber seal however no mounting bolts or wiring kit. One section of the motor casing has been grinded by a pully with flogged engine mounts. Still works fine and does not hinder performance.

Price $100

Stock R33 GTR airbox, no snorkel

Comes with a clean but used (Ryco?) filter with and is supplied as is. All 4 clips that hold the two sections together are working (prone to breaking).

Price $200

Brembo R33 GTR rear brake calipers with used discs

Brakes come with used discs and pads. Calipers were working fine when on car.

Price: $300

Stock R33 GTR Fuel Pump

Does not come with the filter sock or wiring.

Price $40

R33 Skyline Arial

No use for this anymore on the race car. Worked fine when it was installed.

Price $30

IMAG1554_zpspkr0zpjs.jpg

IMAG1550_zpsnlunqyvi.jpg

IMAG1553_zps7ttu1d1r.jpg

IMAG1549_zpsma76mhsr.jpg

IMAG1551_zpsoxwvbyrq.jpg

IMAG1552_zpsjflpkupu.jpg

IMAG1854_zpsykoknvds.jpg

IMAG1852_zpsbi18zkm8.jpg

IMAG1850_zps2ett22pu.jpg

IMAG1837_zpszinbnkhb.jpg

IMAG1838_zps12elxu4k.jpg

IMAG1841_zpsj8g2n1ze.jpg

IMAG1842_zps397xd549.jpg

IMAG1855_zpsxlxclodw.jpg

IMAG1858_zpsfywejsde.jpg

IMAG1859_zps028ewort.jpg

IMAG1848_zpsipk9toky.jpg

IMAG1844_zpsyrqgruyz.jpg

IMAG1843_zpsxfzlcems.jpg

Brembo rear calipers have sold (pending payment)!

Also added:

RB26 Twin Turbo Y Pipe

In great condition, painted with matte black engine paint.

Price: $120

Skyline R33 GTR Centre Gauges (front torque, oil temp, boost pressure)

All gauges working however one back light globe is blown.

Price: $100

IMAG1836_zpswaqxsljl.jpg

IMAG1847_zpsysri6w7r.jpg

Brakes have been paid for and picked up.

Negotiable on all remaining items before I put them up on eBay.

Wheels have sold and turbos are sold pending payment.

Still have:

RB26 Twin Turbo Y Pipe

In great condition, painted with matte black engine paint.

Price: $120

Skyline R33 GTR Centre Gauges (front torque, oil temp, boost pressure)

All gauges working however one back light globe is blown.

Price: $100

Spal 16" Curved Vane Thermo Fan (Pull)

Fan has only been used for approximately 5000kms. Includes rubber seal however no mounting bolts or wiring kit. One section of the motor casing has been grinded by a pully with flogged engine mounts. Still works fine and does not hinder performance.

Price $100

Stock R33 GTR airbox, no snorkel

Comes with a clean but used (Ryco?) filter with and is supplied as is. All 4 clips that hold the two sections together are working (prone to breaking).

Price $200

Stock R33 GTR Fuel Pump

Does not come with the filter sock or wiring.

Price $40

R33 Skyline Arial

No use for this anymore on the race car. Worked fine when it was installed.

Price $30

and also:

HKS SLD Speed Limit Defencer Type 1

No use for this now as I have an aftermarket ECU.

Price $90

  • 9 months later...

Long term bump. Below is still all available. Very negotiable as it's taking up room in the shed.

RB26 Twin Turbo Y Pipe

In great condition, painted with matte black engine paint.

Price: $120

Skyline R33 GTR Centre Gauges (front torque, oil temp, boost pressure)

All gauges working however one back light globe is blown.

Price: $100

Spal 16" Curved Vane Thermo Fan (Pull)

Fan has only been used for approximately 5000kms. Includes rubber seal however no mounting bolts or wiring kit. One section of the motor casing has been grinded by a pully with flogged engine mounts. Still works fine and does not hinder performance.

Price $100

Stock R33 GTR airbox, no snorkel

Comes with a clean but used (Ryco?) filter with and is supplied as is. All 4 clips that hold the two sections together are working (prone to breaking).

Price $200

Stock R33 GTR Fuel Pump

Does not come with the filter sock or wiring.

Price $40

R33 Skyline Arial

No use for this anymore on the race car. Worked fine when it was installed.

Price $30

HKS SLD Speed Limit Defencer Type 1

No use for this now as I have an aftermarket ECU.

Price $90

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...