Jump to content
SAU Community

Recommended Posts

Hello,

Wanting to sell my RB26 crank shaft and main bearings.

It was originally out of an R32 engine that had blown ring lands.

I had it crack tested, and balanced and then decided to machine the mains 10" undersize to get the balance perfect.

It has been machined to suit a set of 10" over bearings ACL race bearings. These will also be supplied.

The crank was drilled and grub screwed also and is supplied with the grub screws.

It has had a crank collar fitted also.

The crank has been coated in rust preventative and was in storage due to family issues and now I have to part ways with it to pursue other things.

To get this work done is very expensive due to the time and precision required, it is in very good condition and just needs a solvent bath and flush and will be good to assemble and install.

I am looking to recover my costs so far and am looking for $900.00.

Thanks for reading

post-14375-14105741629753_thumb.jpgpost-14375-14105741823646_thumb.jpgpost-14375-14105741948186_thumb.jpgpost-14375-14105742051692_thumb.jpgpost-14375-14105742161612_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/448582-rb26-crankshaft-and-main-bearings/
Share on other sites

  • 1 month later...
  • 2 weeks later...
  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
    • To re-cap, I bought: https://www.alibaba.com/product-detail/Lsailt-8G-Infiniti-Q50-Q60-2014_1601171829627.html?spm=a2756.trade-list-buyer.0.0.2cd476e9FTIlKE As you can see, if I bought 20 it was $653, but I bought 1 so it was $1,170. I was very tempted to buy 2 and resell 1 at 25% cheaper. @MBS206, I am not sure if they do a Kluger one, here is their list but it might be there under a global model name: http://www.lsailt.com/product/android-interface?page=1 Keep in mind these full android replacements have basically all the bits a phone does (cpu, ram, storage, wifi, bluetooth, usb interfaces) other than a screen (it uses a host), thus the $800+ cost. Android Auto screen mirroring is MUCH cheaper as it's just a cut down shell, input mirroring and output mirroring BTW I also need that "screen off" feature, it is much harder to see wildlife even if a dash is reasonably dark. Both the Fuga and V37 have display off buttons for night use, they just come back on for a second or 3 if you interact with it, eg skip a song.
    • I use FCC car launcher. It has an option for different backgrounds, so instead of turning the screen off you can swipe 'up' to a black screen with no background/icons. (mine has the time on it only). It's kinda nice. Also lets you use gestures to say swipe to go to next song, etc.  
×
×
  • Create New...