Jump to content
SAU Community

Recommended Posts

Good job man, slow speed manoeuvres are the most difficult skill to perfect!

As the fella at the end was saying; finding clutch friction point, with a little throttle, and controlling speed with the rear brake is the trick with low speed.

Having the drivetrain loaded, and utilising the gyro effect of the motor spinning, stabilises the bike; rather than the unavoidable jerky on/off action when using the throttle around idle.

It isn't so bad on a short geared, torquey single, but on a big bike with tall gearing (mine does 164km/h in first) you simply can't get away with riding at idle, with the clutch all the way out. Once you nail that, you'll never look back.

Great to be able to practice, and pick up tips from experienced riders. Nice job with the BMW as well.

  • Like 1

cheers Dale :)

Yeah I think a lot of it has to do with the bike, I basically sit upright like a pushy so I find slow speed manoeuvres to be a bit easier. There were a few others on the day who were struggling & they were on sports bikes ie ninjas & cb's etc.

It's a fantastic thing to have something like this for learners for free & in Sydney. Once I get more experience I wouldn't mind helping them out to keep these sessions running :)

  • Like 1

20150114_1903061024x719_zps078d6c85.jpg

Quick update. Now with added windkeeperoffythingamajig doovelacky. It's a genuine Yamaha accessory, was a super p.i.t.a getting to the bolts that hold it in place.

Me Rikey

I can tell the difference definitely. I can keep my visor open & it feels like a gentle waft of air. Should work well when winter rolls around, I can duck behind the screen :)

  • Like 1

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

  • Like 2

Nicely done, your head was nice and steady.

Good to see everyone wearing protective gear though :/ lol

Dirt rider in me wanted your U-Turns to be more rear brake and clutch and slidy slidies haha

Shhhhh slides were off camera ;p

Majority of people did have protective gear, just took it off while we were on the course.

I wasn't complaining when the blondie took her jacket off ;)

It would appear another benefit of my windscreen is that my fuel economy has improved :)

Fuel light used to come on around 220km mark, now it comes on around 250k's

not bad for a bit of plastic

  • 3 weeks later...

Passed my MOST test with no errors. Sweet as!

db1_zpsd6q34t0a.jpg

Some pretty cool women ride the scooter & suzuki intruder next to my bike

20150214_123633%20800x543_zpsyow9juwa.jp

My project will amost be done, maybe in the next 2-3 months. Then I can focus my attention back on the old fairlady Z, poor girl has been neglected :)

Picking up my fuel tank & fenders from Craved Coatings first thing in the morning. Time to strip the bike (again)

Would probably have been a less messy affair if I rode the bike until empty before taking out the fuel tank lol

20150220_225322%201024x604_zpsnornwgyk.j

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...