Jump to content
SAU Community

Recommended Posts

Hi

I will be going to Japan on the 12 in this month and staying for 7 days.I will be staying in Ikebukuro(not the most ideal place and time of year to travel to Tokyo).I have some questions.

Is the Daikoku PA, any trip to Hakone or any other "wangan racing"still worth seeing, have read on forums that police is clamping down on it?

Any car related events coming up the next week?

How long would it be to visit Mines,is it worth?

Any other tuners that would be worth visiting around Tokyo exept Top Secret and Nismo,like Spoon,Knight Sports ,Top Fuel ,Feels,Veilside,Mugen maybe?

Thanks

Paal

Link to comment
https://www.sau.com.au/forums/topic/45157-tuners-and-some-other-questions/
Share on other sites

It is well worth the trip out to Daikoku. There is always something going on, and this month there is a big GTR meet being organized. See the thread on the GTROC UK here

Here's a rough idea of the dates/places:

12th July 5am - 10am (Finish time is approximate) - filming at Hakkone as discussed in the thread.

16th July 9.30pm we will do some filming at night, meeting at Daikoku Futo parking area.

Primarily filming will be static at Daikoku Futo, perhaps doing a few runs past the crowds, reving engines, etc... then rigging cameras inside cars and on chase cars, to film top speed runs. May do these in the Aqua line express tunnel, which is well lit (14km of traffic free, speed camera free straight!!)

17th July 11.00 pm at the Rainbow Bridge Parking area - for those who want to join in, C1 highway chase sequences. Need to know the roads to do this well, or try to keep up with my RX-7... although if necessary we can just drive slower, as this will still show well on the video anyway... As long as we're in a chase group and travelling significantly faster than normal traffic, it will make good footage.. although we'll want to record the sound coming off cars at full bore through those tunnels I guess if we go too fast, we'll end up losing people as the slower cars get left behind, which isn't the point of making the video of chase sequences.

Practice runs on the C1: If anyone is interested in doing some practice runs on the C1 say saturday 19th June, let me know. I know these roads well and can teach you the places where speed cameras are, etc.

Thanks Demon Dave

Are Mines far away from Tokyo?

Would you recomend visiting diffrent tuners or is it a waste of time and focus more on other things?If you have seen Top Secret,Mines etc you have seen them all?

Thanks

Paal

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...