Jump to content
SAU Community

Recommended Posts

Ok guys due to buyer bailing out as couldn't come up with funds they back up for sale

Items are basically brand new and have done less then 10kms, selling as going a different setup but it did hold 542kw on my rb26 very strong

6x bosch coils

6x ngk aftermarket leads to suit

Comes with the loom/harness aswell as a bracket that the coils are mounted to

coils are already wired up to them so all ready to plug an aftermarket dli and you will have a great setup and it's a personal choice where you want to mount them :) $400

Aftermarket custom 3" dump/front pipe all one peice off turbo all way through to cat made out of steam pipe, also been heat wrapped for heat $300

Gtr exhaust manifolds

$50

For more pics and pics of dump pipe and he manifolds SMS me and I'll forward a few through

Located in Melbourne

0412862091

post-45737-0-79023200-1421201862_thumb.jpg

post-45737-0-27230700-1421201910_thumb.jpg

post-45737-0-98362800-1421201956_thumb.jpg

Nobody want a strong ignition setup for their modified Gtr? You'll be paying much more, I used a moris tech ignition module and made 542kw with ease and did fix all my ignition problem from the stock igniter and split fires as they were missing up top

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...