Jump to content
SAU Community

Fs Rb26/r32 Gtr Standard Parts (garage Clean Out)

GTR_JOEY
 Share

Recommended Posts

GTR_JOEY Grand Master

GTR_JOEY

Posted
Posted

Getting rid of some parts out of my Garage, starting to look like a wreckers.. prices are neg, will ship for smaller items

R32 GTR charcole canister $30

R32 GTR front mount intercooler (ding at the bottom) still works fine $60

RB26 metal head gasket (used but still good if your not fussy) $40

Standard R32 GTR intercooler piping kit (both sides, 4 pipes) though the first pipe from the turbo is a greddy hard pipe, not using it as i have a single turbo set up now $150

R32 GTR Bov cross over pipe $40

RB26 fuel rail and reg $40

Rb26 coil packs (started breaking down at 350ish RWKW) $50

Rb26 standard manifolds (good as a spare set if you wanna practice porting them out) $30

5x standard RB26 rods (come with pistons, thought wouldn't use them, good paper weights) $30 will sell separately

R32 GTR Front Diff centre $60

Bosch 70 amp alternator $50

cheapo brand Tyres, full set 18x35x245 (good for dyno or skid tyres) $80

OEM oil filter housing/cooler $30

Also have a full set of windage tray bolts

Theres probs more but ive forgotten, located sydney, contact for pics

PM is fine as i check the site reqularly,

  • 3 weeks later...
  • 2 weeks later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Engine Issue

      By GTSBoy · Posted

      Resizing injectors in Nistune can be done a couple of ways, and there are a couple of ways that you can make a mess of it. The tuner needs to be really aware of the effects of whichever approach he uses (either K, or TIM). They are both easy enough to "get the injector size right" to run the engine. But little details like old start enrichment and hot start are affected differently, depending on which boxes you check.
    • Murray_Calavera
      Engine Issue

      By Murray_Calavera · Posted

      Pretty safe to say almost everyone that has tuned their own car has experienced this issue. The difference being that we have our laptop in the car and when it happens, it's literally 10 seconds of tuning to sort it.  Would you be happy to plug in your laptop and sort this yourself? It is a very simple process and there is no risk of harming your engine (if you are worried about that). 
    • Harinder singh
      Engine Issue

      By Harinder singh · Posted

      Yeah thats the next step now, either they wil or i will take out for a drive to work and go straight their after work and see is we get the same issues 🤞  thought i try my luck here too, never know someone else might have had the same issue but thanks for the reply 
    • Duncan
      Engine Issue

      By Duncan · Posted

      Basically your tuner needs to drive it for the 30 min (or whatever) to create the same conditions then check the ECU settings and sensors at that time. They may not be excited to because that takes them 30 min rather than just opening the bonnet and seeing the problem straight away.... Hot start is generally not as tricky as cold start, but there would be a table for fuel enrichment vs coolant temp as a starting point
    • Harinder singh
      Engine Issue

      By Harinder singh · Posted

      Yeah, they all cant say anything for sure as everything is working fine . Said unable to find an issue untill it stops again. Could mist likely be CAS wiring or IAS valve issue but again not 100%
×
×
  • Create New...