Jump to content
SAU Community

Recommended Posts

Hi people

i am relatively new to forums so bear with me if i get some stuff slightly wrong.

I am currently building a 30det with a 25de head. I have gtr valve springs i am going to slap in(cause common knowledge is they float, according to my research)

I have full rebuilt the bottom end, crank collar, n1 oil pump, degalzed, new rings, polished and rebalanced crank, new bearings all round, new waterpump.

I have just managed to get a 25de head the other day, looks good but am going to take it to the engine shop and get it checked out to be safe anyway, can't imagine anything more worse than slapping it together and wondering why i keep chewing through head gaskets.

I have done everything else to motors bar one thing: headwork.

Now my question is this : the head has come with 20det r32 camshafts, and i am wondering if they are going to be any good, or if there is any much point to having them. I have looked up the lift specs:

http://www.tomeiusa.com/_2003web-catalogue/e090_camshaft-specs.html

the cam chart seems to say that the only difference is the exhaust cam. Its lift is .5 more and its degrees is 8 more. Is there any real benefit to this? or would i be best to just get some 25de cams and chuck them back in?

am i wrong or am i reading the chart right? cam work is something i havent dabbled in before, never been brave enough so any help is appreciated

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/454330-rb30de-camshafts/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
×
×
  • Create New...