Jump to content
SAU Community

Recommended Posts

My R34 GTT project goals have changed, from fast / responsive street car to dedicated track car. As a result I'm now selling the new complete turbo kit I had originally bought for it. It includes:

Garrett GTX3071R turbo

Genuine Garrett 5 bolt 0.82 a/r rear housing, IWG

Garrett 14psi wastegate actuator

Spacer plate to fit to OEM exhaust manifold

Turbo nuts and studs

All water and oil lines (braided)

All other required fittings - banjo bolts, crush washers etc.

All required gaskets

Compressor outlet silicon elbow

Dump pipe to suit turbo, ceramic coated

It comes with EVERYTHING needed to bolt straight up to an RB25. I bought the whole kit through Kudos Motorsports, and they obviously sourced it through GCG Turbos in Australia. I had test fitted the turbo to the exhaust manifold, but nothing has been run and the turbo is still as new.

Fellow forum member Mick_o made a responsive 335rwkw from memory (on E85) with the same turbo in his R33.

The whole kit cost me about $3k, and then I spent extra changing the oil and water lines to braided items and getting the dump pipe ceramic coated. I'm looking to get $2,100 for the whole kit, plus delivery.

Cheers

Justin

post-31977-0-43606600-1428038252_thumb.jpg

post-31977-0-46883400-1428038289_thumb.jpg

post-31977-0-07529800-1428038299_thumb.jpg

post-31977-0-77794700-1428038309_thumb.jpg

post-31977-0-95164700-1428038318_thumb.jpg

  • 8 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...