Jump to content
SAU Community

Recommended Posts

1996 Midnight Purple 180SX Type X Forged 307rwkw
155xxxkms

Engine: (built by forced motorworx)

Apexi Power FC D-Jetro
Custom S13.4 Rocker Cover (no need for catch can)
SARD 850cc Injectors
Tomei Fuel Pump
Alloy Radiator
JE Pistons
Spool Rods
Cometic Head Gasket
ARP Head Studs
ARP Flywheel Bolts
Greddy Magnetic Sump Plug
BC Valve Springs
BC 264 Cams
BC Retainers
BC Adjustable Cam Gears
GKTech Rocker Arm Stoppers
Nissan Gasket Kit
Nissan Timing Kit
Nissan Oil Pump
Body Loom Tucked and Rerouted
ACL Race Bearing Kit
Winged Cast Sump
Custom No Holes FMIC Kit
Block Machining:
-chem clean and check
-bore and hone
-crank grind linish and balance
-balance rotating assembly
-balance and blueprint pistons and rods
-deck blockwith timing cover
Head Machining:
-chem clean and check
-pressure and vac test
-resurface head
-3 angle valve grind
-replace valve stem seals
-k line valve guides
Turbo and Exhaust:
Custom Steam Pipe Manifold (high mount)
Turbosmart 44mm External Gate with Screamer Pipe
Kinugawa TD06SL2-20G 8cm V-band
Braided
3” Custom Dump with Flex Pipe
High Flow Cat
Blitz NUR Exhaust

Driveline:

Z32 Gearbox
Bell Housing Professionally Machined
Engineered To Slide Z32-SR20 Adaptor Plate
Engineered To Slide Gearbox Mount
NPC clutch rated to 400rwkw
NPC Custom 10” Lightened Flywheel
ARP Flywheel Bolts
Custom Tailshaft
Solid Rear Subframe Bushes
S14 Lower Control Arms
S14 Knuckles
S14 Front Brakes with 5 Stud Conversion (will come with R33 front brakes and rotors)
R33 Rear Brakes with 5 Stud Conversion
R33 Drum Handbrake Assembly with Eagle Adaptor
HSD HR Front Coilovers
Tanabe Rear Coilovers
Reshimmed Diff
Adjustable Traction Arms
Adjustable Castor Arms
Cusco Front Strut Brace
Cusco Rear Strut Brace
New Rack Ends
New Tie Rods
Steering Lock Spacers (both slip in and screw in)
New Rack End Boots

Body:

Factory Midnight Purple LP2
Type X Spoiler
Type X Front Bar & Extensions
Type X Rear Pods and Valance
Type X Side Skirts
Type X Extension Front Lip
(all factory plastic except front lip)
Type X Tail lights
Kermit The Frog Under Bonnet
Work Meister S13P Custom Metallic Charcoal Centre with Polished Lips:
18 x 9 +6 Front
Achilles ATR Sport
18 x 10 +5 Rear
Federal RSR

Interior:

Factory Type X Interior
Purple Drift Button
Apexi EL Hand Controller (for power fc)
Cams Spec Half Cage
Factory Nissan Quarter Window Inserts (rare as)
Kenwood Mp3/USB/AUX Digital Radio

It will come with the Japanese service manual, 3 Nismo certificates from the factory upgrades that were installed upon purchase in Japan and standard parts from the car.
The car made 307rwkw at Chequered Tuning along with dyno sheets.
It will come with receipts for motor building, clutch, other parts, etc.
There are probably other things I have forgotten to mention.

Price:
$17,8000ono without wheels
$19,400ono with wheels
Serious offers only, don't waste my time...

May be interested in swaps for JZX100, evo, GTR, 4X4 etc

0431 367 863

20141214_161652.jpg

20150328_102142.jpg

20141121_193212.jpg

20141121_193106.jpg

20150411_155548.jpg

DSC_8406.jpg

DSC_8427.jpg

995501_10153307728930542_19376622_n.jpg

1379755_10153318178680542_996473070_n.jp

Edited by bally

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So I actually had the cover off my car today, here is a (bad) pic of the setup. I have an oil cooler thermostat block, the temp sender is straight in there. The pressure sender has a short AN line to a T piece which is mounted (hopefully cable tied counts as mounted....) on the chassis. BTW every fitting you could ever imagine exists....just depends what they cost and how many you need. Raceworx AN adapters are here: https://raceworks.com.au/fittings/adapters/, I think you said you need BSPT to AN (https://raceworks.com.au/fittings/adapters/bsp/tapered/an-to-bspt-adapters/) and AN to NPT (https://raceworks.com.au/fittings/adapters/npt/) BTW, braided line is super simple to make. It looks intimidating, is not.
    • Perfect day for a pie, really needs a soft top in this weather though
    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
×
×
  • Create New...