Jump to content
SAU Community

Recommended Posts

Back up for sale is sale my TD05H-18G with 3" inlet. Its a Kando, new and never used. Friend is selling his S13 project car so bits he had called dibs on are being returned.

It has a Subaru core so is 360deg bearing with water cooled core and oil lube

TD05H-18G

med_gallery_462_50_66814.jpg
med_gallery_462_50_185153.jpg
med_gallery_462_50_208537.jpg
med_gallery_462_50_247453.jpg?t=36239728
med_gallery_462_50_22264.jpg


med_gallery_462_50_112743.jpg

med_gallery_462_50_153163.jpg

Asking $450 for the turbo with no exhaust housing or $750 with the Trust 8cm rear housing (3 bolt)

If you pay up front i will buy the Kando T3 housing with internal gate actuator on your behalf so it all works as a good bolt on RB20 turbo

Link to comment
https://www.sau.com.au/forums/topic/456664-new-td05-18g/
Share on other sites

  • 6 months later...

Bump $400 for the turbo with no housing or $600 with a T3 housing and wastegate actuator so you can start to bolt it on to yuur RB20

For those not familiar with the size of the turbo think the biggest std turbo that Mitsubishi put on the Evo 3. So being an RB20 it wont be as responsive as an EVO but its not exactly a big turbo for a 2L and would expect it to be a little laggier than an HKS 2530 but also make 15-25rwkws more than a 2530

Link to comment
https://www.sau.com.au/forums/topic/456664-new-td05-18g/#findComment-7643330
Share on other sites

  • 1 month later...
  • 4 weeks later...
  • 11 months later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...