Jump to content
SAU Community

Recommended Posts

Early mail is in and as usual, the organisation @ WSID is absolutely SUCKFULL! ;)

Scott has a tankfull of the good gear and an almost entirely un-tuned Power FC. Are 12's on the cards for this evening? Good luck dude!

Adrian

Link to comment
https://www.sau.com.au/forums/topic/45672-wsid-wed-14704/#findComment-934639
Share on other sites

Haha and got beatin by SpecialK on his debut run. times aren't worth mentioning I agree.

I had a run against that crazy 130mph 11 second BMW and won up to a quarter track !!!...I very impressed with myself even though the rest I felt like I was going backwards lol.

"If you need more traction get down on all fours"

Link to comment
https://www.sau.com.au/forums/topic/45672-wsid-wed-14704/#findComment-935027
Share on other sites



  • Latest Posts

    • lol the 2nd one boss, thank you for pointing this out. I feel as i spend more time here this intro message is some thing i will always make me laugh and shake my head at. Perfect Intro:  I have the vehicle  
    • R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
×
×
  • Create New...