Jump to content
SAU Community

Recommended Posts

Updated list:

1) Cusco Hicas eliminator aka delete $old; BNIB

2) Attain Hicas eliminator aka delete $49; BNIB

3) Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4) Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $1195

7) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used

8) APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $275; BNIB

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $old; used

10) Seibon CF R33 Jun style hood $599; used

11) Greddy non-vspec rear diff cover $old; BNIB

12) Mahle Pistons; no rings included $695; BNIB

13) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $1195

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $2995; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18) r34 genuine top secret frp hood $499; used

19) r34 oem cf rear vspec diffuser $OLD; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $OLD; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24) r34 exedy triple clutch #NM053SR $1395; BNIB

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $199; like new

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $OLD; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31) r33 signal auto drag spoiler $399; used

32) Genuine Veilside race intake plenum aka manifold aka surge tank with throttle body, blue anodizing and the Veilside plaque had to be removed in order for the Wiggins to be welded on there; $1395; used

33) Apexi drag core 4 row intercooler, estimated measurements of 140mm thick, 80mm turbo side, 100mm intake side $1395; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

37) r33 GTR strut tower bar $95; used

38) r33 GTR rear seats $95; used

39) oem Pistons set from 1999 r34 GTR vspec, $150; used, one damaged

40) Hks version ati race damper #916060 (hks pulleys not included), $350, used

41) r33 oem power folding side mirrors in white, excellent, $99 for the pair

42) r33 GTR driver side door card aka panel, $50

http://orangecounty.craigslist.org/pts/5295750892.html

  • 2 months later...

Items added/deleted:

1) Cusco Hicas eliminator aka delete $old; BNIB

2) Attain Hicas eliminator aka delete $OLD; BNIB

3) Exedy triple clutch r33/r32 push; NM033HRWH, $OLD; BNIB

4) Ogura triple clutch r33/r32 push 1000F; needs new plates $595; used

5) TRUST GREDDY SPEC-R HG FMIC KIT BCNR33 TWIN ENTRY TYPE 27 CORE; Notes:

R spec Intercooler, dim: 294x710x165mm (largest GReddy core), Inlet 70mm x 2, 100mm outlet, #12020440 ($2800 msrp) $OLD; BNIB

6) APEXi N1 r33/r34 Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $995

7) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used like new

8) APEXi Super Brake Rotors #278-nr10 for factory r33/r34 Skyline GTR rear calipers, Cross drilled and slotted w/free new Apexi brake pads $OLD; BNIB

9) Non-VSPEC R33 GTR Rear Subframe and non-hydraulic mechanical R200 differential $old; used

10) Seibon CF R33 Jun style hood $599; used

11) Greddy non-vspec rear diff cover $old; BNIB

12) Mahle Pistons; no rings included $695; BNIB

13) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $995

14) Tomei 290 11.5 #1421 290115 r34 GTR WPC treated camshafts (pair) $OLD; BNIB

15) 2.8 Stroker Kit: HKS Step 2 forged pistons 87mm, Carillo Pro-H connecting rods, Crower.com (not BC) crankshaft; excellent condition, low miles $OLD; used

16) Factory OEM Genuine r33 gtr wheels Falken good tires $OLD; used

17) r34 garage saurus cf ground effect (side skirts, front diffuser, rear spats); has cracks; see pics $OLD; used

18) r34 genuine top secret frp hood $499; used

19) r34 oem cf rear vspec diffuser $OLD; used

20) r34 N1 Race Super Taikyu cf reinforced front bumper with diffuser $450; used

21) r34 rear trunk lid (damaged, someone tried to pry open trunk) $45; used

22) r34 nismo white face gauge cluster 320km $OLD; used

23) r34 gtr xenon passenger LH headlight with Signal Auto hi-beam air duct mod w/free eye brow/lids uninstalled $OLD; used

24) r34 exedy triple clutch #NM053SR $OLD; BNIB

25) r33 front bumper support reinforcement bar $45; used

26) Lexus SC300 leather steering wheel with airbag $75; used

27) PFC 7778.01.20.44 Race Compound 01 Pad 20mm Carbon Metallic front brake pads for Endless, AP, Alcon 6-POT BBK big brake kit $OLD; like new

28) Endless Matador Series MA22B Brake Pads for Endless, AP, Alcon 6-POT BBK big brake kit RCP052MA22B $OLD; BNIB

29) HKS T51R SPL full turbo kit (turbine, shield, manifold, wastegate, downpipe aka front pipe, intake pipe w/filter, screamer pipe) $OLD; used

30) r34/r33/r32 gtr front wheel bearings (front pair) $OLD; BNIB

31) r33 signal auto drag spoiler $399; used

32) Genuine Veilside race intake plenum aka manifold aka surge tank with throttle body, blue anodizing and the Veilside plaque had to be removed in order for the Wiggins to be welded on there; $OLD; used

33) Apexi drag core fmic aka intercooler, 140mm thick, 700mm length, 260mm height, 80mm turbo side, 100mm intake side $995; used

34) Hawk Brake pads HB180 HPS .591 for factory r33/r34 Skyline GTR rear calipers Ferro Carbon Street compound $OLD; new

35) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

36) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

37) r33 GTR strut tower bar $95; used, excellent

38) r33 GTR rear seats $95; used

39) oem Pistons set from 1999 r34 GTR vspec, $150; used, one damaged

40) Hks version ati race damper #916060 (hks pulleys and bracket not included), $350, used, excellent

41) r33 oem power folding side mirrors in white, excellent, $99 for the pair

42) r33 GTR driver side door card aka panel, used $25

43) random engine parts: Intake manifold, alternator, oem hoses, fan, intercooler hoses, baffle, valves, pistons, r34 CAS (for parts), tension rod

44) Grex oil pump, used, excellent $750

45) Tial blow off valve, used, excellent $99

46) Samco intercooler hoses, new $75

47) clutch slave cylinder, used $25

48) pull to push transmission conversion kit, used $150

49) final drive, used, excellent $150

50) engine & transmission mounts, new $99

51) oem front & rear sway bars, used, excellent $99

52) transfer case, used $150

53) black mesh catch can hoses with fittings, new $60

Located in California but can and have shipped to AUS.

Prices in USD.

  • 4 weeks later...

Prices in USD. Shipping available.

Mostly, R32/R33/R34 skyline GTR RB26DETT parts for sale unless otherwise noted. More Pics available. Thanks for looking.

BNIB = brand new in box

1) Ogura triple plate clutch r33/r32 GTR push 1000F; needs rebuild kit from Nengun.com, $595; used

2) APEXi N1 r33/r34 GTR Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $995

3) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used like new

4) Seibon CF R33 GTR Jun style hood $599; used

5) Mahle Pistons; no rings included $695; BNIB

6) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $995

7) r34 GTR genuine top secret frp hood with pins $499; used

8) r34 GTR N1 Race Super Taikyu carbon fiber reinforced front bumper with diffuser $450; used

9) r34 GTR rear trunk lid (damaged, someone tried to pry open trunk) $25; used

10) r33 GTR front bumper support reinforcement bar $25; used

11) Lexus SC300 leather steering wheel with airbag $75; used

12) r33 signal auto drag spoiler $295; used

13) Apexi drag core fmic aka intercooler, 140mm thick, 700mm length, 260mm height, 80mm turbo side, 100mm intake side $995; used

14) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

15) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

16) r33 GTR strut tower bar $75; used, excellent

17) r33 GTR rear seats, top and bottom, $50; used

18) oem Pistons set from 1999 r34 GTR vspec, $95; used, one damaged

19) Hks version ati race damper #916060 (hks pulleys and bracket not included), $295, used, excellent

20) r33 gtr oem power folding side mirrors in white, excellent, $99 for the pair

21) r33 GTR driver side door card aka panel, used $20

22) random gtr engine parts: alternator, fan, intercooler hoses, baffle, valves, pistons, r34 CAS (for parts), tension rod, make offer

23) GTR Greddy aka Grex/Trust oil pump, used, excellent $750 ($1900 msrp)

24) Samco intercooler (new), breather (used) hoses and est. 30 meter rope 5mm x 2.5mm (new) $99 for the lot

25) GTR clutch slave cylinder, used $20

26) GTR pull to push transmission conversion kit, used $150

27) GTR engine & transmission mounts, new $75

28) R33 GTR oem front & rear sway bars, used, excellent $75

29) R33 GTR transfer case, used $150

30) Pair of black mesh catch can hoses with 1.5" fittings on both ends, like new $50

31) Adel Wiggins tube clamps100mm and 80mm clamps, qty 2 each, used, excellent $75 each or $250 for all 4

32) Greddy aka trust 80mm intercooler, 300x100x600, used, $895

  • 1 month later...

Updated list

1) Ogura triple plate clutch r33/r32 GTR push 1000F; needs rebuild kit from Nengun.com, $OLD; used

2) APEXi N1 r33/r34 GTR Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $995

3) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used like new

4) Seibon CF R33 GTR Jun style hood $599; used

5) Mahle Pistons; no rings included $OLD; BNIB

6) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009; Apexi remanufactured now in new condition ($2500 msrp) $995

7) r34 GTR genuine top secret frp hood with pins $OLD; used

8) r34 GTR N1 Race Super Taikyu carbon fiber reinforced front bumper with diffuser $450; used

9) r34 GTR rear trunk lid (damaged, someone tried to pry open trunk) $25; used

10) r33 GTR front bumper support reinforcement bar $OLD; used

11) Lexus SC300 leather steering wheel with airbag $75; used

12) r33 signal auto drag spoiler $295; used

13) Apexi drag core fmic aka intercooler, 140mm thick, 700mm length, 260mm height, 80mm turbo side, 100mm intake side $995; used

14) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

15) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

16) r33 GTR strut tower bar $75; used, excellent

17) r33 GTR rear seats, top and bottom, $50; used

18) oem Pistons set from 1999 r34 GTR vspec, $OLD; used, one damaged

19) Hks version ati race damper #916060 (hks pulleys and bracket not included), $295, used, excellent

20) r33 gtr oem power folding side mirrors in white, excellent, $99 for the pair

21) r33 GTR driver side door card aka panel, used $20

22) random gtr engine parts: alternator, fan, intercooler hoses, baffle, valves, pistons, r34 CAS (for parts), tension rod, make offer

23) GTR Greddy aka Grex/Trust oil pump, used, excellent $OLD ($1900 msrp)

24) Samco intercooler (new), breather (used) hoses and est. 30 meter rope 5mm x 2.5mm (new) $OLD for the lot

25) GTR clutch slave cylinder, used $20

26) GTR push to pull transmission conversion kit, used $150

27) GTR engine & transmission mounts, new $OLD

28) R33 GTR oem front & rear sway bars, used, excellent $75

29) R33 GTR transfer case, used $150

30) Pair of black mesh catch can hoses with 1.5" fittings on both ends, like new $50

31) Adel Wiggins tube clamps100mm and 80mm clamps, qty 2 each, used, excellent $OLD each or $OLD for all 4

32) Greddy aka trust 80mm intercooler, 300x100x600, used, $895

  • 2 weeks later...

FYI - what's left. Also might sell Mines R34/R33 2-way with external reservoir and LMGT4 Limited Ed wheels)

1) APEXi #263A-N009-F N1 r33/r34 GTR Pro Drag racing Adjustable Dampers Coilover; Apexi remanufactured now in new condition ($2500 msrp) $995

2) APEXi N1 r33/r34 PRO Adjustable Dampers Coilover for circuit/track/street #263AN009-R; Apexi remanufactured now in new condition ($2500 msrp) $995

3) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used like new

4) Seibon CF R33 GTR Jun style hood $599; used

5) r34 GTR N1 Race Super Taikyu carbon fiber reinforced front bumper with diffuser $450; used

6) r34 GTR rear trunk lid (damaged, someone tried to pry open trunk) $25; used

7) Lexus SC300 leather steering wheel with airbag $75; used

8) r33 signal auto drag spoiler $295; used

9) Apexi drag core fmic aka intercooler, 140mm thick, 700mm length, 260mm height, 80mm turbo side, 100mm intake side $995; used

10) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new

11) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib

12) Factory 33 GTR strut tower bar $75; used, excellent

13) r33 GTR rear seats, top and bottom, $50; used

14) Hks version ati race damper #916060 (hks pulleys and bracket not included), $295, used, excellent

15) r33 gtr oem power folding side mirrors in white, excellent, $99 for the pair

16) r33 GTR driver side door card aka panel, used $20

17) random gtr engine parts: alternator, fan, intercooler hoses, baffle, valves, pistons, r34 CAS (for parts), tension rod, make offer

18) GTR clutch slave cylinder, used $20

19) GTR push to pull transmission conversion kit, used $99

20) R33 GTR oem front & rear sway bars, used, excellent $75

21) R33 GTR transfer case, used $150

22) Pair of black mesh catch can hoses with 1.5" fittings on both ends, like new $50, also have another pair with 1.5" fittings on one end and open on the other end, $25

23) Greddy aka trust 80mm intercooler, 300x100x600, used, $895

  • 2 weeks later...

Some cool parts I'm adding to the list. Postage from California. Prices in USD.

24) Authentic, rare Ganador Japan power side mirrors for a r33 Nissan skyline GTR, painted QM1 white, used, $599

25) Qest Japan rear LED taillights for r33 GTR, bnib, $499 for the pair

26) R33 black Nismo 320kmh 11,000 RPM gauge odometer cluster combo meter, 24810-RN595, $599

27) Momo Race Tuner Series Steering Wheel, leather, aluminum, quick release with BOSS kit, $175

28) R33/R34 GTR Mines Dynamic two-way adjustable, damper coilover, with external reservoir, 22k/20k Swift springs, new condition, revalved by Haas Racing in Illinois, $1995

  • 4 months later...

Updated list:

Prices in USD.

Massive skyline parts for sale

Mostly, R32/R33/R34 skyline GTR RB26DETT parts for sale unless otherwise noted. More Pics available. Thanks for looking.

BNIB = brand new in box

1) APEXi N1 Pro Adjustable Dampers Coilover for Drag racing, 9" springs, 9k/8k spring rate, for r33/r34 GTR; Apexi rebuilt it to new condition ($2500 msrp) $995
2) Brembo 2-piece 332mm = 13" front rotors (pair) for F50 Big Brake Kit $850; used like new
3) Seibon CF R33 GTR Jun style hood $599; used
4) r34 GTR rear trunk lid (damaged, someone tried to pry open trunk) $25; used
5) Lexus SC300 leather steering wheel with airbag $75; used
6) r33 signal auto drag spoiler $295; used
7) Hawk Brake pads HB209F .583 for Honda Civic HPS compound $44; new
8) Centric standard brake rotors #121.42013 for 1990-1992 Infiniti M30 $39 for the pair; bnib
9) Factory r33 GTR strut tower bar $75; used, excellent
10) Hks version ati race damper #916060 (hks pulleys and bracket not included), $295, used, excellent
11) r33 GTR driver side door card aka panel (ok condition), used $20
12) random gtr engine parts: alternator, fan, intercooler hoses, baffle, valves, pistons, r34 CAS (for parts), tension rod, control arms, make offer
13) R33 GTR oem front & rear sway bars, used, excellent $75
14) Greddy aka trust 80mm intercooler, 300x100x600, used, $895 for r33 GTR
15) Qest Japan rear LED taillights for r33 GTR, bnib, #qj-c303, $650 for the pair
16) R33/R34 GTR Mines Dynamic two-way adjustable, damper coilover, with external reservoir,brand new front pair of Cusco pillow balls, 2 sets of springs and helper springs, 22k/20k and 12k/10k Swift springs, new condition, revalved by Haas Racing in Illinois, $3500
17) r33 GTR Oem 1995 (has scrapes) $99, Oem 1998 (brand new) $450, Gracer (brand new) $395, front chin aka lip aka bumper spoiler, or $699 for all 3 lips
18) Nissan oem skyline r33 GTR windshield wiper motor brand new in box, $75
19) Nissan oem climate AC control unit, r33 GTR, used, $35
20) Kazama #xkmr1170 Nissan S and R chassis subframe spacers aka member rigid collar, brand new $75
21) Peak Performance front adjustable tension rod, r33 GTR, like new, $99
22) Authentic A'pexi El meter gauges with mounts and control unit. Wiring harnesses and sensors not included. You can buy them direct at apexi-usa.com. Meters are Water temp, exhaust temp, oil pressure, fuel pressure and oil temp. Like new. $375
23) oem black bcnr33 taillights, left right set, $99 used. Good shape.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...