Jump to content
SAU Community

Tanabe 4inch Exhaust

ess15
 Share

Recommended Posts

ess15 Enthusiast

ess15

Posted
Posted

Hey Guys,

I need to change the exhaust on my 32 gtr. I see the only 4inch straight through is the tanabe concept g blue, and HKS..?

I like the look of the Tanabe but hard to source and on their website it doesn't show if it suits skylines or not.

I know they are built for Supras but they also not listed on their site. Ive had no luck contacting the supplier either..

Anyone know if they fit skylines? Know a supplier? Would consider the HKS unit but just wanted something slightly different to the norm..

Cheers

SAm

Link to comment
https://www.sau.com.au/forums/topic/457688-tanabe-4inch-exhaust/
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

There are no Jap 4 inch systems, you may find a 100mm, but most are 90mm at the back, with plenty of restrictions in between.

You are obviously chasing power, so it's best to go for a custom twin 3 into 4 inch system, then drop it to 3.5 for the rear muffler to keep the noise under control.

ess15 Enthusiast

ess15

Posted
  • Author
Posted

There are no Jap 4 inch systems, you may find a 100mm, but most are 90mm at the back, with plenty of restrictions in between.

You are obviously chasing power, so it's best to go for a custom twin 3 into 4 inch system, then drop it to 3.5 for the rear muffler to keep the noise under control.

Thanks Scott but the Tanabe claims full 100mm all the way through and is fitted on many supras, just not sure on GTR's. The HKS system yes is only 95mm

Setup im going for is over 1000whp.

Joey I am on the gold coast

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...