Jump to content
SAU Community

Recommended Posts

Hi guys and girls, I have decided to go for a single turbo while my engine is out and to fund it I am selling off my full twin turbo setup.

Now it comes with everything you need to literally bolt up to your stock rb26.

Including HKS 2540 twins (flow a little more than hks2530s at moderate boost levels but really come to life when u really wind the boost up)

I made 305kw@wheels on 17psi untuned, I wound them up to 24psi and had massive top end rush from 5k onwards and held all the way to my 8300rpm limiter. So, great for drag racing but not the best for tight hillclimbs etc.

The turbos have zero shaft play, or damage. I am simply going Single while my engine is out. Come and inspect, they come with HKS actuators and studs, manifolds and even oil lines if you require them. $1300

Next is the exhaust system (Xforce split dumps) Stainless. perfect condition. $250

HKS midpipes. twin 2.25 into 3inch ($300

3inch catback exhaust its on my r34 but came off a 33 gtr. ($300

and to aid in response and flow I have a custom twin turbo pipe with divider added $200 (eliminates turbo shuffle and improves response)

Or the whole lot as a package for $2100.

I can post anywhere you like. located Newcastle NSW

Cheers fellas,

Blake

attachments (1).zip

attachments.zip

Need money for a to finish my build! Buy my stuff :)

Turbo's $1000

Dumps $225

Midpipes $225

Exhaust $250

Split twin turbo merge pipe $200

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...