Jump to content
SAU Community

2007 Skyline V36 350gt Type Sp

Jeremy1607
 Share

Recommended Posts

Jeremy1607 Collaborator

Jeremy1607

Posted
Posted

Hi all,

The time has come for a change, I'm selling my car. I have had it for over 3 years now. It's in a very good condition, have never had any problems or been in any accidents.

I have spent quite alot of money into it, all the mods are listed on the carsales ad.

Car has done 50,000kms and it's serviced every 5,000kms (I have all the receipts).

Here are some of its features :

Paddle shifters behind steering wheel

Keyless entry and start

Dual zone climate control AC

Bumper, side mirror and reverse camera

Factory DVD player and CF card reader

Intelligent cruise control

Auto bi-xenon headlights

Front and rear parking sensors

Full black leather interior

Wood grain dash and door panels inserts

Front heated seats Front electric seats with driver memory and lumbar adjustment

Entry and exit assist (seats moves forward and steering moves when you turn the ignition on. and seats moves back and steering wheel moves up when you switch the ignition off)

Electric steering wheel with tilt and telescopic adjustment

Digital TV Tuner

Electric folding mirrors (when switching on the ignition or locking the car) and much more.

Feel free to message me if you have any questions.

Visit carsales for photos and more info :

http://www.carsales.com.au/private/details/Nissan-Skyline-2007/SSE-AD-2134606/?Cr=0

Thank you

post-79744-0-36138700-1446464856_thumb.jpg

Link to comment
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      Any recommendations on a decent replacement manifold that doesnt break the bank or require additional mods for the stock turbo setup? I figure if I'm going to pull the manifold off anyway to fix the studs might as well replace it. 
    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      So I checked the turbo out today. Very minimum play at all just enough for the oil to take up when it's running. I did find an exhaust leak at the manifold. 1 stud all the way in the front is missing and the one all the way in the back is broken off. Front has visible signs of an exhaust leak. I'll fix that soon but that's not my problem still.  I also found that the nipple coming off the turbo had the hose capped off and a hose ran from the j-pipe by the bov going to the wastegate. I removed that hose and capped that nipple and put the turbo nipple hose back on the wastegate.  There was a ton of oil residue all through the charge side of the intercooler piping going to the throttle bodg. I'm thinking that's from the pcv. Doesn't seem to be coming from the turbo that was all clean on the pipes side.  Haven't had a chance to check fuel pressure yet, haven't had time been having to pull a lot of doubles at work. I did pick up some carb cleaner to clean the iacv but wanted to make sure I had a fresh gasket in case the old one rips when I pull it off.  I'm waiting on a MAF that was supposed to be here today but delayed to Monday. Have a double Monday and Friday and work all of next weekend so going to try to find some time in the middle of the week to try that out. Did about a 10m trip around the block today and towards the end the issues were coming back. Fingers crossed on this MAF but if not just going to throw a fuel pressure gauge in and see where I'm at.  Did notice today that I can definitely hear the injectors pulsing. Very audible clicking coming from them. Assuming that's normal? Should also mean CAS is functioning somewhat properly. After it warmed up when I started it the intermittent misfires came in again. Did start doing that before it was fully warmed up. 
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
×
×
  • Create New...