Jump to content
SAU Community

Rb25det Kicks But Won't Run.

Pauly The R33

By Pauly The R33,
in Engines & Forced Induction

 Share

Recommended Posts

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Yeah I thought that to be a logical step to replace it and bang it would fire up but not the case , leading me to an ecu or timing remedy . I'll put the safc back in and see how it goes.

Basically replacing all parts for new for reliability and fault finding purposes .

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Wired Safc back in same issue noticed my rpm wasn't showing up and getting issue with tacho on dash, will clean up the plug and dash and replace the tps sensor for good measure . Also going to replace the 02 sensor & sourcing my self an ecutalk consult cable.

Going to Wire up my adaptronic ecu and set it up and the fault find continues.

Also might replace the Alarm system as it was installed previously and i just don't trust it.

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

so you replaced the fuel hoses and coolant lines and it wont fire? check lines, can you remember if you put the fuel pump fuse back in?

Yeah trex ive check all of these and put it all back together as per the nissan manual. Fuel pump runs as per the above comments

Pauly The R33 Contributor

Pauly The R33

Posted
  • Author
Posted

Progress !! Noticed the afrs on the safc were rich AF then low as . Fitted my sard fpr and set it to 43psi to get me 12:1 ish and its running ! need to fix up and idle issue its only idling at 400rpm and will stall after boost. Going to inspect my standard fpr but being 20yrs old its had a good life.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • foney
      Cheap Gtr For Sale

      By foney · Posted

      BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Rezz
      First time Skyline owner

      By Rezz · Posted

      Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
×
×
  • Create New...