Jump to content
SAU Community

Looking For: Someone To Help Source Rb30 Short Blocks To Export To Canada


Recommended Posts

Hi guys,

I've been trying to source some help in exporting a few RB30 short blocks here to Canada. I'm hoping to get 2-3 of them together so my friend And I can build some RB26/30's for our race cars.

Im hoping I can find a kind Austrailian in a sea port area like Brisbane who can source the blocks and strap them to a pallet so I can have the freight company pick them up and send them on their way.

I was in contact with an engine importer but j guess they lost interest when I didn't want long blocks to save space to ship a third block (just as a spare incase on of the other ends up unusable)

If anyone can help me out that would be amazing

Thanks!!

Rob

Have you tried looking on gumtree?

I have been looking on Gumtree and even posted an add there. However my ad keeps being taken down and finding someome on gumtree who has 2-3 short blocks to ship.

I wanted to try SAU to see if a member wanted to make alittle cash for car parts off some old RB30's they have kicking around

No worries mate if i see or hear ill let you know

Thank you so very much.

I should add, Im not necessarily looking for someone who has 2-3 short blocks but maybe someone who has one or knows of someone with one and would collect up a couple more off Gumtree or other classifieds so they can make some money.

I had an Engine company that normally deals in Jap import engines willing to help but they wanted me to buy whole drive lines (engine and trans) at over $1000 each. I see engines on Gumtree for less then $300 and I dont need the trans or even the top of the engines so shipping the whole drive trains was going to very very expensive and totally unnecessary.

I am trying to avoid hopping on a plane, renting a Ute and driving around pulling them out from under peoples decks and junk yards haha.

Edited by Deejaytexhfx

Yeah stuff that mate when i get some free time ill have a hunt around for you. Are you after a8 block or just any rb30det block

Yeah stuff that mate when i get some free time ill have a hunt around for you. Are you after a8 block or just any rb30det block

I believe I am after A6 Short blocks aka the RB30E. I know for my own build ill be installing new Piston and Rods along with all bearings ect and Im pretty sure my friend will end up doing the same so buying the rarer A8 or RB30ET blocks would just be a waste.

Will look around for you if a sydney port will suit

Thanks brother that would be greatl! The shipping company has offices in all the ports, I just got a quote from Brisbane because that where this shop was that said they could help us out. I cant imagine it being too much more so long as im shipping from the same side of the country haha.

You all have been a great help i really appreciate it

Sent you a pm mate

Thanks Mate, Sent you a reply.

If anyone comes across anything, that would be stellar!

You guys are all awesome

Rob

Still searching...

Sadly shipping from Australia to Canada is half the price of shipping from the US to Canada... Plus the AUS and Canadian dollar are much closer then the CAN to US Dollar is

Ok so found a few blocks around, theres definitely no shortage here in aus. Whats your budget on just blocks alone without freight costs? What im thinking is i may be able to go round with a trailer or delivered to me depending on where they are sourced (wreckers would deliver ) put them all on a pallet and get them picked up from me using courier and deliverd to melbourne port, then from Melbourne to you. Depending on how much work i do & cost of engines obviously i will work out what its worth. Its even easier if i have a few weeks to hunt down some bargains, buy and store them till i have everything you need.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...