Jump to content
SAU Community

Recommended Posts

Attempting to replace the D-bushes on my front sway, which is stock as far as I can tell (M35). However, I have only found one resource on it... Forums here one guy mentioned it was 29mm stock. Ended up buying cheap calipers and checking it out to be sure and I got 30mm.

Have spoken to a few parts providers, such as eBay sellers and the Nissan dealerships service teams, and they all say the only sizes that are stocked are 26mm, 32mm and 34mm. What?!

Has anybody changed theirs before? Do I have to get a whole new sway bar at a size that actually has D-bushes made for it? Is there some tricky shit going on because I have the turbo AWD variant as opposed to something a bit more basic? What's the go? Any help would be much appreciated!

Link to comment
https://www.sau.com.au/forums/topic/465007-front-sway-and-bushes-sizes/
Share on other sites

The bar is 29mm.

OEM rubber are fine, and only cost around $30 from Nissan. I've been using a set of these for years on uprated Swaybars for years with no issues.

Whiteline don't do a replacement in OEM size, but pretty sure nolathane do.

They also use the PTFE impregnated polyurethane which is awesome, and completely maintenance free. They require no greasing or external lubrication.

  • Like 1

Thanks for the replies! I've been super lost on what to do about all this.

I'll definitely be contacting Nolathane. I've been to both Autopro and Autobarn this last week and they've only offered the 26/32/34mm variants. I've given them all the details they asked for to the best of my knowledge... Maybe I missed something?

Cheers :yes:

Are you looking for OEM rubber replacements or poly bushes? If you're just after OEM bushes you could try a Nissan spares at a dealership part# is 54613AL520 *some* are actually helpful and are happy to order parts (others not so much).

Alternatively purchase via Amayama etc.. Best to order a few items to make it worth the shipping cost (although i've found their shipping Japan->Aust warehouse to be very reasonable).

Other option is upgrade...

  • Like 1

Here's to hoping I won't need them custom made!

TCO, anything will do at this stage. We're not 100% sure it'll fix my problem so the sooner I patch this up the closer I'll be to getting it resolved... Have you had experience with both? Any recommendations?

Good info though, really appreciate it!

What issue are you trying to resolve?

Nissan will be hit an miss depending on the parts guys enthusiasm (Morphett Vale guys are pretty helpful). I've bought a bunch of bits and pieces via Amayama, shipped from both UAE and Japan warehouses. Reasonably quick with replying and shipping etc.. haven't had any issues yet, just have to make it worth the shipping.

Have a wobbly/clunky metallic noise from the front end that happens with every little bump in the road. Sounds like something is loose and banging against a rubber surface of some kind. I have a mate who's a 4th year apprentice but has minimal experience with imports, so we did our best at a self diagnosis lol. The previous owner was told it was his ball joints, but we checked those out and didn't look like they were the issue. Noise doesn't seem to be coming from that area when the car is jacked up and the wheels wobbled around. Figured we'd just replace the cheapest parts first since it's not a big deal if they don't fix the issue.

I spoke to the Morphett Vale Nissan parts guy, he was pretty helpful and providing him with the part number you gave made him pretty happy haha. They can get them in but it can take up to 3 months supposedly... Ringing around to see if I can get them sooner, elsewhere.

Part number is; 54613AL520

You can see it below in the exploded diagram. You can also see it in EPCdata, and even order online.
The link rods are there too; there are 3 different pieces, left and right had arms, and a universal base piece that bolts into the lower arm.

Their prices are significantly cheaper for genuine parts than Nissan Australia.

http://nissan.epc-data.com/stagea/nm35/6835-vq25dd/trans/401/54613/

6ce72c48ce37b83634a35c5a2218ca6c.png

e2c5bb851b629d88e4c29b6ea4174422216c5120

  • Like 1

Any chance you could help me with this? https://www.amayama.com/en/search/?q=54613AL520

I'm not sure what the order form is asking me. The top option suggests I'd pay for parts to be sent from Dubai to Japan I think? And the option below from Japan to Australia? Since I need 2 bushes, will I need to order 2 from the top and 2 from the bottom? Confused, haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...