Jump to content
SAU Community

[04/06/2016] Imports First Meet - Baldivis


Recommended Posts

Hey all, just got invited by a friend to the Imports First Meet in Baldivis. <- This is a link

All of the information I have is from the Facebook page, so check that if there are any changes.

When: Saturday the Fourth of June (04/06/2016) at 20:00-14:00 (That's Eight O'Clock in the Evening until Two O'Clock in the Morning.)

Where: Baldivis Masters, Corner Safety Bay Rd & Baldivis Road, Baldivis WA, 6107

Who: Will Add names here after confirmation

Pre-Meet Location: [to be confirmed]

These are the same guys who organised the Joondalup meet from last Saturday.

Important Information:

There is a No-Hoon Policy, Imports First have stated on the facebook page:

Whose keen for this weekend?

But also saying that, anyone that does excessive revving, skids or burnouts number plates will be taken so don't ruin it for everyone else as that behavior will not be tolerated and further action may be taken so everyone drive save and we will see you all on the weekend.

There is Discussion of a Cruise down to the Rockingham Foreshore after the Meet, but I don't know if that's official or not.

Also, for anyone with a lowered car, Enter from where the Main Masters sign is, as there's no speed-bumps, although it is a tight turn.

It's a pretty easy location to get to, if you're North of Rockingham, take the Freeway South and Exit at Safety Bay Road, Turn Right and Baldivis Masters will be on the Left, just after the Giant Round-A-Bout where the Caltex Fuel Station is (great if you need a top up after the drive)

The Instructions are pretty much the same for those South of Rockingham - Get on the freeway, Exit at Safety Bay Road and Turn Left, it's right next to the freeway.

There's a Hungry Jacks and a Subway there as well for any one hungry and brave.

If you're in the Mandurah area you probably know how to get there, but if not - Get on Ennis Avenue, Exit onto Old Mandurah Road, follow through to Eighty Road, It will be on your Left..

Right, with that being said, let me know if you're going and I will add your names to this post.

Also, if you want to organize a meet up before-hand, post it below and when we decide on a location I will add it to this post to. We only have Three days until the event, so please be hasty with your responses.

I don't need to say this but I will - Drive Safe, Do not Drive Tired, Do not "Show off", Let's get there safely, in one piece and enjoy the drive also: Theres usually speed cameras southbound on the freeway, I make that trip a lot, don't be stupid.

Thank you.

  • Like 1

It's miles away from me , so I'll give it a miss on this one :) Dave and I going for drink and nibbles with WRX's cruise tonight , come and join at Hillarys if any of you want to join and say hello [emoji28]

Edited by ElleAli76

The way I see it is:

Double Demerits + Baldivis is a bit of a recipe for disaster, I made this thread though, just to raise awareness of it, if any one did want to go.

Sorry to all my Rockingham/Mandurah/Baldivis friends (I grew up down there), but it is what it is.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...