Jump to content
SAU Community

[04/06/2016] Imports First Meet - Baldivis


Recommended Posts

Hey all, just got invited by a friend to the Imports First Meet in Baldivis. <- This is a link

All of the information I have is from the Facebook page, so check that if there are any changes.

When: Saturday the Fourth of June (04/06/2016) at 20:00-14:00 (That's Eight O'Clock in the Evening until Two O'Clock in the Morning.)

Where: Baldivis Masters, Corner Safety Bay Rd & Baldivis Road, Baldivis WA, 6107

Who: Will Add names here after confirmation

Pre-Meet Location: [to be confirmed]

These are the same guys who organised the Joondalup meet from last Saturday.

Important Information:

There is a No-Hoon Policy, Imports First have stated on the facebook page:

Whose keen for this weekend?

But also saying that, anyone that does excessive revving, skids or burnouts number plates will be taken so don't ruin it for everyone else as that behavior will not be tolerated and further action may be taken so everyone drive save and we will see you all on the weekend.

There is Discussion of a Cruise down to the Rockingham Foreshore after the Meet, but I don't know if that's official or not.

Also, for anyone with a lowered car, Enter from where the Main Masters sign is, as there's no speed-bumps, although it is a tight turn.

It's a pretty easy location to get to, if you're North of Rockingham, take the Freeway South and Exit at Safety Bay Road, Turn Right and Baldivis Masters will be on the Left, just after the Giant Round-A-Bout where the Caltex Fuel Station is (great if you need a top up after the drive)

The Instructions are pretty much the same for those South of Rockingham - Get on the freeway, Exit at Safety Bay Road and Turn Left, it's right next to the freeway.

There's a Hungry Jacks and a Subway there as well for any one hungry and brave.

If you're in the Mandurah area you probably know how to get there, but if not - Get on Ennis Avenue, Exit onto Old Mandurah Road, follow through to Eighty Road, It will be on your Left..

Right, with that being said, let me know if you're going and I will add your names to this post.

Also, if you want to organize a meet up before-hand, post it below and when we decide on a location I will add it to this post to. We only have Three days until the event, so please be hasty with your responses.

I don't need to say this but I will - Drive Safe, Do not Drive Tired, Do not "Show off", Let's get there safely, in one piece and enjoy the drive also: Theres usually speed cameras southbound on the freeway, I make that trip a lot, don't be stupid.

Thank you.

  • Like 1

It's miles away from me , so I'll give it a miss on this one :) Dave and I going for drink and nibbles with WRX's cruise tonight , come and join at Hillarys if any of you want to join and say hello [emoji28]

Edited by ElleAli76

The way I see it is:

Double Demerits + Baldivis is a bit of a recipe for disaster, I made this thread though, just to raise awareness of it, if any one did want to go.

Sorry to all my Rockingham/Mandurah/Baldivis friends (I grew up down there), but it is what it is.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
×
×
  • Create New...