Jump to content
SAU Community

Deca.. Officials

RCHOO

By RCHOO,
in Archived Events

 Share

Recommended Posts

RCHOO Grand Master

RCHOO

Posted
Posted
Deca.. Officials

Its DECA time

 

 

 

And once again we ask for your help

 

 

 

When....November 12th

 

Where..DECA Complex Shepparton

 

 

 

We are after a small group to be volunteer Officials

 

We are after Timers/ Starters and Marshals .

 

Lunch and drinks we will supply on the day.

 

All Volunteers will need to be out at DECA complex by 8am for a quick breifing.

 

We need 8 volunteers for the morning

 

And 4 for the afternoon

 

 

 

So if your coming up for a look or you have some friends coming up i need your help.

 

Days like this can not run without volunteers.

 

So post up here your interest or find me on the day.

 

 

 

Cheers WayneO

Link to comment
https://www.sau.com.au/forums/topic/467600-deca-officials/
Share on other sites
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      I'm guessing you mean something like this size? https://www.supercheapauto.com.au/p/bodyworx-bodyworx-hard-soft-sanding-block---70-x-135mm/594184.html?cgid=SCA01100303#srsltid=AfmBOoq_qZTEe3boann9BaHiB2f59dxJlosWLzCr0zm_weHgUlDX-N5f&start=6 Are they sanded completely flat?
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      Just a standard sanding block size. With the rock chipa they are quite small. I sanded them as you could feel the edges. 
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Say you've just laid all your filler and your about to start sanding, how large is the sanding block your using?  Like a high fill primer? Technically possible but would be a nightmare. Just guessing from the photo, but they look small enough that you might get away with using a 1k spot putty. Normally you'd use something like this on pinholes but with the type of project you're working on I'd give it a go. 
    • Shizu
      Sheraaz's R34GTT Build

      By Shizu · Posted

      Omg Brake pedal removal.. FML!!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
×
×
  • Create New...