Clutch fork/Slave cylinder issue

[PaddyCef]

Clutch fork/Slave cylinder issue

Hey guys,

So i blew up the 20DET box that was in my Cef and managed to Get a 30e box for cheap from a guy i know.

The problem I'm having at the moment is after bolting all the 20DET bits to the gearbox the slave cylinder push rod doesn't line up with the dimple in the clutch fork.

The push rod sits right at the end of the fork almost half off the end of it like the slave cylinder is spaced too far out from the gear box.

I've had a good search and google and can't find anything, anyone got any ideas?

Thanks in advance I'll dedicate the first skid to you if you can solve it 

Edited December 14, 2016 by PaddyCef

[iruvyouskyrine]

Need pictures of everything mate

[PaddyCef]

Got it sorted mate took to the bottom of the slave cylinder with the bench grinder to get it sitting closer to the bellhousing  it all lines up now