Jump to content
SAU Community

Recommended Posts

product review - adjustable rear lower control arms

I'd  been looking at the no-name chinese made adjustable lower control arms for the R33 gtst (ikeya ripoffs by the look of it) and haven't seen a lot of info out there about these so, when I saw a set fairly cheap through Tas Autosport (Great seller, Hamish is great to deal with and very well priced) I grabbed a set to see what they're like.

First thought was, Christ they're heavy but weighing them up they came in just on 3kg and the stock arms were 2.54kg so not THAT much heavier, and they're wayyyyy more solid. The finish was good, welds look decent enough. Outer end looks to be a forged piece? Inner bearings have a rubber cover but outer ones (spherical bearing rather than ball joint) don't, although neither do the top-brand ones that I could see. These will be on a road car so grabbed a set of rubber boots from repco to fit over them rather than leaving them exposed.

Fitting them to the car, the inner bearings are too short (around 5mm) to fit snugly inside the subframe mounts so you will need a few washers to put at each end to make up the distance. Not a big deal but make sure you have some handy when fitting. Otherwise they fitted just fine, and the swaybar mounts are in a better position if you're using an adjustable swaybar as I am, with the stock arm mounting points not quite lining up properly.

Will update after doing some real driving on them but initial thoughts after a quick drive; as you'd expect from such a solid piece compared to stock there's a real firm and direct feel when weight's transferred to the wheel when cornering...although I've found words don't really cover the feel of the car, it is just that, a feel you have to drive it to appreciate.

These were $220ish delivered, and on the stock arms I'd replaced the ball joint and fitted superpro inner bushes so would have been close to this price already. I'm assuming the weak point of these will be the bearings (outer ones are easily replaceable, held in with a c-clip) so will see how they go over time and after some more extensive driving.

The open design also makes it a lot easier to work on (refitting swaybar links were a breeze).

20161216_174632.jpg

20161216_191039.jpg

20161216_191112.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the linkie. Certainly always a great deal of help when people post comparisons like these, but I think for now I'll stay away from any semi slicks. I did go ahead and order the sportcontact 7. My buddy has them on his modified A4 and he keeps saying how good they are. For my intended purposes these will probably work real well. I'll report on them once I had the chance to try them out
    • Talk about noisy. Even when I still had the Tomei under the car I could distinctly hear the tires rolling. And I doubt I ever will need maximum grip like on a track. My GTR will maybe never even see the 600hp mark and I need to get used to the car quite a bit before challenging the limits of its handling. For the next winter storage I think I will get a set of these rubber drive-on thingies that have a tire shaped base. Those supposedly really help prevent flat spots.
    • Well our climate is definitely way less hot overall and the weather can be quite picky at times. I just know that during normal road use or even spirited drives there is no way I'd be able to consistently stay in the operating temperature, and constantly changing the tire pressure would also be a royal pain.
    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
×
×
  • Create New...