Jump to content
SAU Community

R33 ecu mods in perth

Rewa25DeT
 Share

Recommended Posts

Rewa25DeT Rookie

Rewa25DeT

Posted
Posted
R33 ecu mods in perth

Hey guys, im sure this has been covered but some more current info would be alot of assistance.

I have a jap spec r33 25det, was looking for someone(or can direct me to someone) who can modify an my ecu to run up to 12psi safely with maps for every day drivabilty as well.

If not, does anyone have an ecu they would like to part ways with.

Thank you and hope for a great reply. Cheers

 

Link to comment
https://www.sau.com.au/forums/topic/470208-r33-ecu-mods-in-perth/
Share on other sites
Rewa25DeT Rookie

Rewa25DeT

Posted
  • Author
Posted
6 minutes ago, Coullsy said:

Purchase yourself a Z32 ECU, send it to a nistune dealer, get it chipped and a base map put on, than get it tuned

I was going to buy a nistune and a z32 afm off gumtree. Thought there could have been a less expensive way. Cheers coullsy

Coullsy Community Regular

Coullsy

Posted
Posted

Not really, at the end of the day and ECU is an investment, its something that you need to do only once if you do it right, it can be remapped and tuned right through the build of the car to get the most out of the items you are installing.

Nistune is probably the cheapest bang for buck ECU you can buy, depending on what you plan to do in the future rally determines what you buy, if your going to build a track monster or want more parameters, than it would be worthwhile looking at a Link G4, Haltech 2500 etc etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...