Jump to content
SAU Community

$5 Clock upgrade for R32 GTR

msammut
 Share

Recommended Posts

msammut Contributor

msammut

Posted
Posted

just thought I would show you all mu $5 R32 gtr clock repair I just completed.

I was not prepared to pay $100 Plus for a used 20 year old clock. Or more for a New Old Stock (NOS) one so I researched and found a tiny 12V digital clock module and decided to try and fit it in the original case and make the buttons work.

The result is as shown .

 NOTE: It is not a direct replacement and does not function as the OEM one.

It is very bright at nignt.

It shows the time continuously.

The buttons do not function as OEM.

The Reset button is not used. 

 

Having said all that what do you expect for $5 and an hours work.

The Good. It has an inbuilt temperature sensor and a voltmeter. It can be set to scan though Time-Temperature-Voltage every few seconds.

It does what I want for very little cost.

 

IMG_1700.JPG

IMG_1702.JPG

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/472443-5-clock-upgrade-for-r32-gtr/
Share on other sites
  • 2 weeks later...
msammut Contributor

msammut

Posted
  • Author
Posted

Ok.

This is the nodule I purchased.

3 IN 1 12V 24V Car Auto Digital Led Electronic Time Clock Thermometer Voltmeter http://r.ebay.com/zf9Ou

I will put together a document with the details and post it up her soon as I can. once it is up you can decide if you can do it yourself.

 

Michael

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...