Jump to content
SAU Community

Round 3 - Sandown Saturday 21st April - Hosted by WRX + (Come & Try)

acsplit

By acsplit,
in Archived Events

 Share

Recommended Posts

acsplit Veteran

acsplit

Posted
Posted

5ab1cb23bdac9_Round3Sandown21-4-2018.png.2b9b373b8cc43fe8b9b866412292c60b.png

Round 3 hosted by WRX with come and try entries available too.

Date: Saturday 21st April

Where: Sandown Raceway 591-659 Princes Hwy, Springvale VIC 3171

Standard Price: $220 Affiliate - ends Friday 13th April 2018  Affiliate discount code: 795KVMHK

Late Entry: $15 fee applies after 13th April 2018

Come and Try:  COME AND TRY GROUP - $100 - MAX 20 ENTRIES

The WRX Club will be running a single come and try group at this event aimed at introducing new members to motorsport. The come and try component is untimed, and only valid for those that do not currently hold a L2S license or haven't purchased a Level 1 come and try license in the past twelve months.

CAMS Level 1 Come and Try Licenses are an additional $25 (Card Only) to be paid directly to CAMS at driver sign in.

Due to the single group nature of this event, two come and try drivers can not share the same vehicle 

ENTRY: For full event details including rules and regulations click: HERE

Round 3 2018-01.png

  • Like 1
  • 5 weeks later...
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...