Jump to content
SAU Community

Recommended Posts

Hi all I just bought myself my first ever Nissan Turbo after being a Subaru WRX lover and owner I bought a Stagea and love it from driving to bragging I’m just a little lost with finding & buying parts as I’ve found out my 2001 Nm35 awd v6 turbo is a bitzer so my question is Where and What parts aftermarket and genuine parts are interchangeable 

Link to comment
https://www.sau.com.au/forums/topic/474764-nm35-stagea-replacement-parts/
Share on other sites

A lot of stuff from 350Z, V35 and G35 will fit. If you're looking for new genuine, check-out partsouq. Just pop in your VIN and it'll list each section from the workshop manual and include part numbers. Either Google or eBay the part numbers or just order from partsouq. Took 4 days to get a new brush kit for my starter motor from them and was only $100 shipped.

20 hours ago, Robert Worm said:

Hi all I just bought myself my first ever Nissan Turbo after being a Subaru WRX lover and owner I bought a Stagea and love it from driving to bragging I’m just a little lost with finding & buying parts as I’ve found out my 2001 Nm35 awd v6 turbo is a bitzer so my question is Where and What parts aftermarket and genuine parts are interchangeable 

You have made a mistake being a subaru lover to start off it, now you're making another mistake by buying the nm35.

Still, go on M35 tuner facebook page, a tons of info and people sell parts there all the time. If you're in Vic, speak to Scotty and Scotty customs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...